Labor insurance gloves are one of the simplest security labor insurance products. Only through reasonable and scientific use can labor protection gloves be extended to life, play their labor insurance role, and protect our hands.
Welded Gabion Box (baskets), also known as welded stone cage, are made of Welded Wire Mesh panel. Welded gabion baskets can be connected with other similar containers and filled with stone to form flexible and permeable structures for retaining of riverbank and soils.This kind of wire mesh containers are uniformly welded and can be supplied of various sizes.
Characteristics
Finishing
Ÿ(1) Heavily galvanized
Ÿ(2) Galfan coated (95% zinc + 5% aluminium)
Specification
10 x 10
10 x 5
8.3 x 10
500 x 500 x 250
500 x 500 x5 00
1000 x 500 x 500
1500 x 500 x 500
2000 x 500 x 500
3000 x 500 x 500
1000 x 1000 x 250
2000 x 1000 x 250
3.5
4.0
4.5
Work gloves are an instrument used to protect the safety of our hands. Maybe you will ask: Why is it called labor insurance gloves? Is it something that other gloves don't have? Yes, it can be worthy of this name because it has special protective functions, and these functions are other Not available in ordinary gloves.
Because of their different functions, various protective gloves will be used in different places. Because of its special performance, we should protect it when it is used, otherwise it will not have the protective function it should have, and it is no different from other ordinary gloves. 
Because the protective characteristics are very important to it, we should pay attention to the following aspects when purchasing and using:
1. We should choose the gloves that suit our own size according to the size of our hands: we can't choose too small gloves, because if you choose gloves that are smaller than our hands, when you wear them, we will feel that the hands are very good. At the same time, it is not conducive to the circulation of blood in our hands; but we can't choose too big gloves. If the gloves are too big, then we will feel quite inflexible when we work, and the gloves are very easy to get off the hands. Come down.
2, we should choose the glove that suits you according to your work environment. Different gloves have different protective effects, and only when they are selected according to the special circumstances encountered in their own working environment will not cause unnecessary danger.
3. No matter which type of glove you are using, you should check it in considerable detail. Once it is found to be damaged, you should replace it immediately. If you find that it is damaged and you are not willing to replace it, you should put on other gauze gloves or leather gloves on it for normal use.
4. If you choose gloves made of synthetic rubber, the color should be very uniform, and the palm part should be thicker, but the other parts should be the same thickness. And its surface should be relatively smooth. Most importantly, there should be no damage on the top of the glove, otherwise it can no longer be used.
5. If you choose gloves made of rubber, then you should not let it be in contact with acids and other substances for a long time, but more importantly, you should not let such sharp objects touch it.
6. The cuffs should be put into the mouth of the mouth during operation to prevent accidents.
7. After use, the internal and external dirt should be wiped clean. After drying, sprinkle with talcum powder to prevent damage, and do not put it on the ground.
8. When transporting, it should not be in contact with oleic acid or other corrosive substances, and stored outside the heat source 1M, in dry and ventilated -15 degrees to 30 degrees, relative humidity 50~80%.
9. Re-testing of withstand voltage performance must be carried out every 6 months.
10, lighter weight and multi-range size offer more flexibility; textured surface helps to grip the item; cotton knit inside, spacious cuffs for more comfortable people working in higher temperature environments sense;
Applicable environment
1. Insulating gloves for live working
It refers to an insulating glove that is used for electrical insulation on the hand when the operator carries out live working on electrical equipment (or DC electrical equipment of the corresponding voltage level) with an AC voltage of 10 kV or less. The product model, dimensions and technical requirements shall comply with the provisions of the General Technical Conditions for Insulating Gloves for Live Working.
Gloves must have good electrical insulation properties. At the same time, it also needs good tensile strength and elongation at break, as well as puncture resistance, aging resistance, flame resistance and low temperature resistance.
Second, acid and alkali resistant gloves
It is a protective product for the prevention of acid and alkali damage to the hands, and its quality should meet the requirements of "acid (alkali) gloves". Gloves are not allowed to have defects such as blooming, brittleness, stickiness and breakage. The non-leakage of gloves means that it must be airtight. Under certain pressures, air leakage is not allowed.
According to the material, the gloves can be divided into rubber acid and alkali resistant gloves, latex acid and alkali resistant gloves, plastic acid and alkali resistant gloves, and plastic acid and alkali resistant gloves.
Waterproof gloves and anti-virus gloves can be replaced by acid-resistant gloves. 
Third, oil resistant gloves
These products are made of materials such as nitrile rubber, chloroprene or polyurethane to protect the skin of the hands from various skin diseases caused by oily substances such as acute dermatitis, acne, folliculitis, dry skin. Cleft palate, pigmentation, and nail changes.
Fourth, welder gloves
Personal protective equipment to protect hands from high temperatures, molten metal, and sparks during welding. Made of cow, pig leather or two-layer leather, it is divided into two-finger, three-finger and five-finger according to the finger type. Welder gloves have strict appearance requirements. The first grade requires the leather body to be even and thick, full and soft and elastic, and the leather surface is fine, uniform, firm, and the color is uniform and without greasy feeling. Second-class products: the leather body lacks fullness and elasticity, the leather surface is rough and the color is slightly dark. 
Five, anti-vibration gloves
Personal protective equipment for contact vibration, such as in the forestry, mining, construction, transportation, etc., when using hand-held vibration tools (such as chainsaws, rock drills, etc.) to prevent vibrating occupational diseases "white finger disease" caused by vibration. In the structure of the anti-vibration gloves, a certain thickness of foam, latex and air interlayer are added to the palm surface to absorb vibration. The thicker the pad thickness, the more air it contains and the better the damping effect. However, when the palm and the finger are too thick, it is easy to affect the operation.
Six, fire resistant flame retardant gloves
The traditional fire-retardant gloves are made of asbestos material and are available in two-finger and five-finger styles. They are available in large, medium and small sizes. Because asbestos fibers are irritating to human skin, they are rarely used. Fire-retardant flame-retardant gloves are generally made of flame-retardant canvas or other fire-retardant fabrics, which are suitable for use in smelting furnaces or other furnaces.
Seven, anti-static gloves
A woven fabric composition containing conductive fibers. The other is a long-fiber elastic acrylic woven glove, and then the polyurethane resin is applied to the palm portion, or the polyurethane resin is applied to the fingertip portion or the surface of the glove is coated with polyethylene.
Gloves containing conductive fibers quickly dissipate static electricity that collects on the hands. Gloves with a polyurethane or polyethylene coating are mainly resistant to dust and static electricity. These products are mainly used for the assembly of weak currents, precision instruments, product inspection, electronics industry, printing, inspection work of various research institutions. 
Eight, clean gloves
It is made of natural rubber and can prevent the discharge of fingertips in the production process. It can prevent the static electricity of the human body from causing damage to the product during the process of producing dust-free gloves. The product is effectively protected from the contamination and influence of residues, oil, dust and sweat on the fingers during the production process. The clean room is mostly made of polyvinyl chloride (PVC) gloves. 
Focus on procurement sharing, the alliance of mro procurement sharing is about a variety of industrial auxiliary materials tender collection platform. Centralized bidding for scattered purchase orders, reducing the cost of both buyers and sellers, streamlining processes, transparent transactions, reducing waste in intermediate links such as purchase, sales, logistics, and warehousing; solving the purchase and sales costs of both parties, and achieving a win-win situation for enterprises. 
Http://news.chinawj.com.cn 
Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
(1) Economic:just fill the stone into the Gabions and seal it
(2) Simple installation: no special technology needed
(3) Weather proof under natural destroy, corrosion resistant
(4) No collapse even under big scope of deforming
(5) Sludge in the stones is good for plant growing
(6) Good permeation can prevent the damage by hydrostatic
(7) Less transport freight. It can be folded together for transport and further installation
Welded Panel For Gabion,Hot Dipped Galvanized Gabions,Aluminum Gabions
DINGZHOU TIAN YILONG METAL PRODUCTS CO., LTD. , http://www.wiremeshsolution.com