On the 6th of January, the Laba Festival just passed, the sky just started to be white, and the Xugong XCA550 all-terrain crane rushed to a large wind farm in Shandong, where a wind power hoisting blockbuster will be staged. Going to the wind farm at 6 o'clock in the morning Communicating with customers on the way up the mountain is catching up with the heavy pollution of the air in Beijing and Shandong in the past few days. There is also a lot of helplessness in the jokes, and only relying on one's own efforts to help wind power green energy construction. XCA550 superior climbing ability On the way to the construction site, Xugong XCA550 has more than 100 hilly dirt roads. More than 50 hillsides of not less than 30 degrees have to be overtaken. Not to mention big cars, ordinary off-road vehicles are not good, let alone 20 meters in length. A large crane weighing 90 tons. Under the guidance of Xugong, a service engineer of XCMG, the customer first felt the XCA550's super-loaded climbing force. As the industry's first 550-ton seven-bridge product, XCA550 achieves the ultimate level of Qiqiao products. Through XCMG's leading dual-power drive, it realizes five-axis drive, and the heavy-duty transition slope ability is up to 35%, which is an industry overload. The strongest transition ability. 58 tons of motor installed in place The fully upgraded self-disassembling technology enables the self-disassembling function of the boom, super-lift, legs and counterweight to be self-disassembled without the need of an auxiliary crane. It takes only 2.5 hours from the driving state to the lifting operation. Independently designed independent suspension axles, the load capacity of a single axle is increased to 40t, the minimum ground clearance of the vehicle is 380mm, and the independent oil and gas suspension technology has better performance and higher driving comfort. Let the wind turbine equipment be installed in place before the arrival of the windy season XCMG XCA550 arrived at the construction site facing the test of large winds. Under difficult conditions, the construction workers were armed with the help of Xugong field service personnel, with a strong wind of 9m/s, and the big arm, super-lifting and supporting legs were well-organized. It is mentioned that the advanced self-disassembling technology saves us a lot of time and also saves the cost of using an auxiliary crane. The XCA550 adopts a 90-meter main boom super-lifting condition plus a 6-meter dedicated wind power arm. The center height of the fan is 80 meters. The 58-ton head and the 4-ton multi-lock are firmly docked in the tower base in high wind. On the seat, the bolts were successfully aligned and the cable was released successfully. The blade weighing 36 tons was seated again in the cheers without any suspense. Her perfect performance won the applause and deep appreciation of the construction party. The outstanding performance of Xugong G's new generation was also recognized by Song boss. The customer immediately decided to order a XCG XX75 as an auxiliary vehicle to contribute to the motherland in the future green energy construction journey! The hoisting has not ended, the customer can't wait to make a victory gesture The XCMG XCA550 has installed two 1.5 MW wind turbines in 4 working days. Its excellent climbing performance is commendable, and it can climb the 40-degree slope smoothly. Its stable hoisting performance has made another great achievement for green energy construction. Excellent performance and perfect on-site performance once again prove to the world the strength of China's manufacturing. Like a giant with open arms, he embraces the peaks under his feet. Responsible editor: Jia turned
NANSHAN
Powder Actuated Fasteners are specifically fabricated to meet the exacting
requirements of toughness and durability that enable them to penetrate dense
concrete and structural quality steel. All NANSHAN fasteners with .300 head
will fit into tools with 8mm barrels.
NANSHAN Drive Pins can be used for the
Powder Actuated Tools and gas actuated tools of
NANSHAN®, POWERS®, RAMSET®,
HILTI®, SIMPSON® and BLUE
POINT FASTENERS®.
Drive Pins Drive Pins,Drive Pins For Faster Tool,Drive Concrete Pin,Drive Pin Fastener Sichuan Nanshan Powder Actuated Fastening System Co., Ltd. , https://www.nanshanpat.com
We maintain only the highest standards in the materials, production
techniques and quality control measures used to manufacture our fasteners,
assuring consistent, optimum quality in every fastener.
