1. The resin production plant supplies raw materials to the forming processing plant and the compounding plant, and the waste generated in the production is sold to a recycling factory or sold as a secondary resin to a molding processing plant. 2. There are three ways to prepare the raw materials for molding: new materials supplied by resin suppliers and compounding plants; recycled materials provided by recycling plants (cuttings, etc.); defective products and other products supplied by secondary processing plants , scraps, etc. The products are sold to packaging plants, assembly companies and other users, and the waste generated during processing can be recycled or sold to recycling plants within the scope permitted by their equipment. 3. The compounding plant buys the resin from the resin manufacturer, mixes it with the additive and sells it to the molding plant. The waste generated can be reprocessed in the plant or sold to the recycling plant. Many molding plants now directly make their own ingredients, such as polyvinyl chloride molding processing plants; while polyolefins are generally formulated by the resin plant during the synthesis. 4. The secondary processing plant processes the finished semi-finished product (such as plastic film) into a finished product (such as a plastic packaging bag, etc.), and the waste generated here is supplied to a molding processing plant or a recycling factory. Packaging plants, assembly plants, and sales companies obtain products from molding plants or secondary processing plants, and sell them to users after packaging and assembly. 5. Recycling the plastic waste obtained from various industrial production processes, reprocessing it, selling it to the molding processing plant, and recycling the small amount of waste generated by its own equipment. 6. The last part of the plastic recycling network is the consumer, the waste plastic produced by the consumer, some of which are collected and then recycled to the recycling plant for recycling. The other part, due to recycling technology and cost, becomes a public waste plastic. Landfill or incineration.
Matters concerning the export of Graphite
Over the years, China has been the most * big exporter of Natural Graphite products, in deep processing of graphite products technology leading developed countries, is against the natural graphite "with purchase and adopt a generation of" strategy, and technology blockade, natural graphite as a kind of non-renewable resources, with very good foreground countries limit zhi, its export of primary products, such as export carbon rods, artificial graphite, Graphite Block, pre-baked anode, etc., need to be dealt with the dual-use items.
The price of natural Graphite Powder is determined by three main factors: carbon content, moisture and particle size distribution.
1. The higher the carbon content, the greater the purity of graphite, so the price will rise in the form of the acceleration line (i.e., the higher the purity, the more complex the production process, and the higher the price increases).
The larger the scale, the lower the natural content and the higher the price. Conversely, the smaller the particulate matter, the less content in nature and the higher the price. Therefore, for natural graphite, the price of the normal (i.e., the material at the top of the sieve) is high. In the positive eye, the smaller the number, the bigger the scale and the higher the price. In negative eyes, the larger the number, the smaller the scales, the higher the price, the lower the price of negative items.
Artificial graphite HS codes for 3801100090, customs supervision conditions for export license of dual-use items and technologies, when customs clearance in addition to submit normal trade documents, and shall be submitted to the ministry of commerce issued "export license of dual-use items and technologies".
Materials for application of electronic key for dual-use items:
1. Application of electronic key for approval and approval (seal of enterprise official seal and approval seal)
2. Copy of business license (seal of enterprise)
3. Photocopy of the record registration form of foreign trade operator or a copy of the approval certificate of the foreign-invested enterprise (with the official seal of the enterprise)
4. Applicant's identity card and copy of the company's legal person identity card (seal enterprise seal)
5. Service contract (please refer to the representative office or office)
6. Copy of bank payment receipt (wire transfer voucher, bill)
Information on import and export of dual-use items
1. Trade contract
2. Export (import) packing list
3. Certificate of final user and end-use abroad
Application for export license of sensitive items and technologies of the People's Republic of China, etc.
Graphite Export Packing,Graphite Packaging,Graphite Block Packaging,Graphite Powder Packaging Fengcheng Ruixing Carbon Products Co., Ltd , http://www.lnfcrxts.com