The automatic milk powder packaging machine greatly facilitates the daily working life of the factory and improves the production efficiency. However, if there is a problem with the automatic milk powder packaging machine, it may cause the company’s products to stop production and eventually lead to delayed delivery. Honesty and crisis, in order to cope with this situation, in addition to daily maintenance of the automatic powdered milk powder packaging machine, we also need to understand how we should solve the problem if the automatic milk powder packaging machine in addition to the problems in the daily work process, Below, Wuhan Dongtai Brewery Xiaobian comes to list the common faults and solutions of automatic milk powder packaging machine! jndtdt03
1. When automatic milk powder packaging machine operates, there is a large deviation in the position of the bag, the gap between the color label and the label is too large, the positioning of the color label is faulty and the photoelectric tracking compensation is out of control. In this case, the photoelectric switch can be readjusted first. Try the position, if not, clean the former, insert the packaging material into the lead plate, and adjust the position of the paper guide so that the light spot coincides with the middle of the color mark.
2. In the process of packaging, the feed motor of the automatic milk powder packaging machine does not turn or is not controlled. It is also a common fault. Check whether the paper supply control lever is stuck, whether the starting capacitor is damaged, and whether the fuse is damaged. Problems, and then replace them according to the inspection results.
3, lamination of packaging containers is not strict, this phenomenon will not only waste materials, but also because the materials are powder, easy to spread, pollution automatic powder packaging machine equipment and workshop environment. In this case, it is necessary to check whether the packaging container meets the relevant regulations, remove the inferior packaging container, and then try to adjust the sealing pressure and increase the heat sealing temperature.
4, automatic milk powder packaging machine does not pull bag, pull bag motor off the chain, causing the cause of this failure is nothing more than the line problem, pull the bag near the switch is damaged, the controller fails, there is a fault in the stepper motor driver, one by one Check and replace.
5. During the operation, the packaging container is torn off by the automatic powdered milk powder packaging machine. Once this happens, it is necessary to check the motor circuit and see if the switch is damaged.
1. Multi-use for Blending Whisking Beating Stirring, Ideal for mixing eggs, sauces and topping.
2. Material: stainless steel, Stainless steel human hand to lay eggs, feel comfortable
3.Practical and stylish, can be used repeatedly
4. Why Much Sturdier than common? : Use More Wires, Thicker Wires,Thicker Handles
Kitchen Stainless Steel Whisk Set
Kitchen Stainless Steel Whisk,Stainless Steel Whisk,Stainless Steel Whisk Set,Stainless Steel Kitchen Whisk Tools
BOHAO ENTERPRISE CO., LTD , https://www.yj-bohao.com