Now we will not forget to paste the wallpaper when we decorate, and many families have chosen to do it themselves, because we do not understand the decoration technology is very easy to twist the wallpaper stickers. In order not to have such a problem, how should we paste the wallpaper correctly? Do you know how to paste the wallpaper? Today, Xiaobian will take a look at the precautions of how to stick the wallpaper and paste the wallpaper! How to stick wallpaper (1) Fill the wall with a grout and fill the wall with a spatula. (2) Measure the size of the wall, and then measure the wallpaper based on the wall area. Pay attention to the length of the wallpaper, which is 5Cm more than the actual surface. (3) Then add the powdered wallpaper glue to the water to reconcile the general wallpaper to 1:3, the foamed wallpaper to 1:2, or use the special glue for wallpaper without modulation, and use the special glue for the wallpaper with the roller brush Even brush on the back of the wallpaper surface. (4) Then, the wallpaper is placed on the wall, and the brush is flattened from the top to the bottom with a wooden handle, and the wallpaper is leveled. (5) When encountering the power switch or socket, first cover the wallpaper and then brush it with a wooden handle, then use the utility knife to draw a cross on the diagonal, use the scraper to resist the edge of the switch, and use the utility knife to cut the path. Go to the extra part. (6) If the wallpaper is connected by the printed wallpaper, find the consistent position of the pattern at the junction of the two wallpapers, and the overlap is about 12cm wide. After the whole wallpaper is aligned, use the scraper to resist, and then cut the overlapping part with the blade. Just fine. (7) When attaching wallpaper, pay attention to sticking from top to bottom. If you find that the floating patch is uneven, you can use a towel to wet it, then re-level with a scraper. (8) Finally, the wallpaper around the doors and windows is processed, and the method of processing the wallpaper at the power switch is the same. (9) After the wallpaper is pasted, the original device is replaced. Self-sticking wallpaper notes 1. Pay attention to the proportion of putty and glue when handling the wall before the wall is applied. The yin and yang angles are straight and polished. 2. After the wall surface is polished, the floating ash after the wall surface is polished in front of the base film is cleaned as much as possible. 3. Brush the base film to buy a good quality, the base film should be as dry as possible after brushing. 4. Ask the professional to measure the area before buying the wallpaper, (due to the waste of the wallpaper), to avoid the paper is not enough, the delivery is a waste of time! 5. Always brush the top coat before the sticker. Wall switches and sockets can be installed or not. It is best to install the baseboard, door and window cover first. Because the wall is not flat after the installation, the seam should be smoothed before the sticker. 6. When cleaning the wallpaper, be sure to clean the glue at the seam. Try not to open the window when the sticker is attached, and it is not advisable to open the window after it is attached. Wait 3-5 days for the wallpaper glue to dry completely before opening the window. Self-posting wallpapers are actually very simple, but we need to control the paste method to complete quickly. The above is the small series of self-adhesive wallpapers that are introduced to you today. The notes on how to paste and paste wallpapers are here. To learn more, please continue to pay attention to the decoration home. Strips/Corrugated Texture PU Sandwich Panels
Strips/Corrugated Texture PU Sandwich Panels
Rich selection of textures and colors meet different decoration requirements, giving the city and the buildings a new look. External Wall Panels,Insulated Outdoor Wall Panels,Strips Texture Pu Sandwich Panels,Corrugated Texture Pu Sandwich Panels Jinan Zhengtang Insulation Decoration Material Co.Ltd , https://www.ztwallsiding.com
The PU foam is the most advanced and eco-friendly insulation material in the world. With the help of the back aluminum foil, the thermal preservation effect achieves the best.
The unique structure prevents the heat loss in winter. Meanwhile it reduces the heat of the summer sunshine.
Aceta paintcoat and flurocarbon paint of weather resistance performance are applied on surface of wall panel. It is reserved with superior self-cleaning, weather resistance, corrosion resistance and acid& alkali resistance performance.
Light weight with 3.7Kgs/m2 makes the installation easy.
The installation process is clean and tidy without any noise and dust, construction waste.
Different selections of accessories meet different effects.
High quality and stable performance: Manufactured in CNC automation production line, the product pass rate can reach 99.9% with stable chemical structure and physical structure.