When a burn accident occurs in a coal mine, the ambulance personnel should quickly rescue the injured person on the spot and pay attention to protecting the injured wounded during the rescue process. Don't be busy removing or cutting off the wounded clothing so as not to damage the wound surface and the pollution. In addition, the ambulance personnel should conduct a full-body examination of the injured before sending the injured to the hospital for rescue to see if there is a combined injury. In general, burns can be seen at a glance, but other injuries are sometimes difficult to detect. Therefore, neglecting inspections when carrying the wounded will bring more pain to the wounded and may even endanger life. For wounded people who have been burned by a blast, they must also check whether the brain, the brain's internal organs, and the respiratory tract have been burned. If the chemical burns, the ambulance personnel must also pay attention to the rescue of systemic poisoning.

During the first aid of the wounded, if the wounded is found to be in shock due to pain and fear, use acupuncture to stop pain or take painkillers. In the event of an asphyxia with acute laryngeal obstruction, a thick needle can be used to pierce the trachea from the ring fascia to ensure ventilation and temporarily relieve the threat of asphyxia. If the injured person breathes, has a bad heartbeat or even stops breathing, artificial respiration should be performed on site and the heart be rescued. For chemical burns, the wounded should first be washed with plenty of fresh water. However, other burns are generally not treated or broken. The first-aid treatment was completed on site and the wounded should be sent to the hospital promptly after the injury was improved. It is worth noting that when the injured are taken to the hospital, the injured should be moved gently and smoothly. The ambulance vehicles should reduce the bumps on the road as much as possible. At the same time, the ambulance personnel should observe the injured person at any time.
.

China Labor Insurance Network

Our stainless steel Ring Mesh T-Shirt is crafted from 0.53mm wire, 3.81mm diameter mild stainless steel butted rings. These shirts provide a comfortable, authentic appearance. The stainless steel ring mesh T shirt was measured over gambeson and undergarments and also can be used as fashional or decorational shirts.

 

Ring Mesh T-Shirt

Ring Mesh T-Shirt,Steel T-Shirt,Metal Mesh T-Shirt,Cut Resistant T-Shirt

Sino(Beijing)Technology Co.,Ltd , http://www.dubetterglove.com