The ignition oil pump and the ignition oil pump we usually use can basically be used in the same situation or completely replace the residual oil pump. The ignition oil pump needs to pay attention to five matters during installation: 1. When installing the ignition oil pump, it should be noted that the arrow on the valve body should be consistent with the flow direction of the medium. Ignition oil pump installation precautions and time-sensitive process analysis The ignition oil pump and the ignition oil pump we usually use can basically be used in the same situation, or can completely replace the residual oil pump. There are five things to note when installing the ignition oil pump:
We could make all types sizes of the link chain, high quality of link chain with competitive price.we use stainless Steel 316 or stainless steel 304 or carbon steel . DIN763(DIN5685C), DIN766(DIN5685A), Australian type, ASTM standard(G30, G43, G70, G80), Norwegian type, Korean type, US type, double loop chain, DIN5686 knotted chain, Japanese type and so on .
1. When installing the ignition oil pump, it should be noted that the arrow on the valve body should be consistent with the flow direction of the medium.
2. The ignition oil pump should ensure normal operation within the fluctuation range of 15%-10% of the rated voltage of the power supply voltage.
3. The ignition oil pump should thoroughly clean the pipeline before installation. The medium that Botaibang enters in the pipeline must be free from impurities. A filter should be installed in front of the valve.
4. After the ignition oil pump is installed, there must be no reverse pressure difference in the pipeline.
5. When the ignition oil pump fails or is cleaned, a bypass device should be installed to ensure the system continues to operate.
The aging of the high-pressure gear pump depends on the choice of the process of vibration aging. The process of vibration aging is complicated, and the process analysis of the box parts must be carried out before the vibration, and the vibration parameters should be optimized to improve the vibration aging effect. According to the material and structure of the workpiece, the process form and process of the blank manufacturing, the distribution of the residual stress field of the box, the dimensional accuracy requirements, the working load, the possible failure causes and other factors are analyzed, and then the vibration aging is determined. The process line is timely and key.
Http://news.chinawj.com.cn 
Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
High Quality Chain, Steel Chain, Industrial Chain, Heavy Duty Chain, Stainless Steel Chain
QINGDAO SANJET NEW POWER MACHINERY CO., LTD. , https://www.sanjet.net