Many students who are preparing for the renovation will encounter this problem. Is it the first thing to install wooden flooring or to install the door first ? This topic is not new, many owners do not understand the decoration, and even businesses have their own arguments. The traditional practice is generally to install the floor first, but now because the floor is free of paint, so often first install the door, then lay the floor. However, if the door is a suite door, it is better to lay the floor first. If you first install the door, you need to determine the thickness of the floor in advance, and leave the installation gap at the bottom of the door. The advantage of installing the door first is that it does not affect the painter's ability to close the wall. If you are still struggling to install wood floors or install doors first , you may as well reveal the answer with me! First install the wooden floor or first install the door In fact, there is no absolute order for which item to install first in the decoration process. From the actual situation of the owners, there are also first-door installations. Post-installed projects do a good job of protecting some of the finished products that have already been installed; for our renovated homes, avoiding unnecessary losses and troubles is the most desired result. Relatively speaking, I suggest to install the door first and then install the floor; (this is in line with the law of the overall renovation order from top to bottom, from the inside out) What problems need to be considered when installing the door first? 1, easy to soil the floor The swarf that needs to be hit when the door is cut, and the styrofoam that is used to install the mouth. If you first install the floor, it will surely contaminate the floor. 2, easy to damage the floor Many of the tools used to cut doors are metal tools, and they require a lot of space to work. If they are not careful, they will damage the floor. 3, baseboard can not close If you do not install the door and install the floor first, the baseboard near the door will not close. Defects in the first door installation: 1. It is difficult to control the gap between the lower edge of the door and the floor (as shown in the figure below). In order to open/close the door, it is necessary to reserve a relatively large gap, but this is neither a visual nor a practical point of view (poor sound insulation). best choice. First install the floor or first install the door _ decoration must see. In the end is the first to install the floor or first install the door? This topic is not new, many decoration owners understand that even businesses also have their own arguments. 2, floor paving to the mouth of the door or to leave expansion joints or cut the floor into a cornice shape, but no matter how to do it can not be a perfect match between the floor and cornice, more affect the visual effect. If you first install the door, the floor must be cut to the blue line in the picture, but after all, it cannot be made tight, and glass glue is needed to make up for it. If you still don't understand it, you can understand it as a closet. Obviously, it is better to place the wardrobe directly on the floor, much better than splicing it to the wardrobe after the floor is cut into the shape of a wardrobe. There are no two defects in the separate living room and bedroom, which is why non-pass flooring should be installed first. The reason I suggest to install the door first is as follows: 1. From the perspective of installation and coordination, after installing the door cover, the skirting line of the floor is installed and cut and fixed to cover the door. It will be more closely matched, and there is no need to pay for the closing of the skirting board. 2, from the point of finished product protection, said the first door, finished product protection is relatively easy, whether it is dripping styrofoam, glass plastic pollution, the installation of power tools for the use of the door, packaging waste, sawdust, drilling nail chisel impact. Operate directly on the concrete floor without damaging the floor; It is necessary to pay special attention to the fact that if the installation is very compact, it is hoped that the door will be installed immediately after the door is completed. It must wait for the door sealer to dry or negotiate the time to finish the floor, finish cleaning, and then seal the seal. Door covers and kicks, buckles. Some homeowners worry: If you install the door first, then when the door leaf opens, you will smash the floor. What should I do? There are two possible reasons for this situation: The first possible reason is that the leveling of the original ground or leveling of the ground is insufficient, and some constructions emphasize that the leveling of the ground is smooth and smooth. This argument is wrong because only the furniture is placed on the level of the ground. Only on the vertical wall will be close to; again to remind everyone stressed: leveling test is based on the level of detection of the deviation value is qualified; Avoid this kind of situation: Floor level and flatness are checked before laying the floor, that is, the flatness of floor pavement is not more than 3mm on the basis of the level of horizontal deviation, and the stone highest point and cement floor (the floor) The difference between the paving base should be consistent with the optional floor thickness plus the thickness of the floor mat to avoid artificial obstacles (that is, the floor is higher than the passstone or lower than the passstone); in addition, the solid wood floor that needs the paving keel should be reserved Floor + keel thickness; To check the flatness of the ground level: Check the entire floor and corners with a two-meter horizontal measuring ruler and feeler gauge. The second reason that may exist is that the safety of the door is not vertical. When the door leaf is opened, it may take a fan or scratch the floor. To prevent this from happening: 1. Ensure that the door is vertical when installed, 2. The reserved dimensions between the lower edge of the door leaf and the floor (floor installed base layer) meet the following requirements: floor thickness + floor mat thickness + reserved gap 5~ 8mm, retains the net size of the gap (excluding the space occupied by the thickness of the floor buckle) is not less than 5mm, this is the national standard. 3, door cover installation clearance reserved floor installation should seek the views of the owners, with a cork wedge to reserve the floor plus mat thickness, to maintain the installation of the door to press the floor of the relationship. Of course, if there are special circumstances, it can be flexibly arranged Such as: 1, due to a long custom wooden doors, the construction of the ground and the top surface of the wall has been met with paved flooring conditions, rushed to finish the floor as soon as possible to customize the furniture or retired the original housing needs to be moved to the old; 2, wooden doors or metal doors need to fix the track on the floor; 3, wooden door fixed fan or decorative fan needs to be fixed on the floor, can be arranged according to the actual needs of the paving order) Serious Reminder - Prerequisites for Door and Floor Installation The wooden doors and the floor attached to the grass-roots need to be basically dry, and the basic layer moisture content should not exceed 12%. If the humidity is too high, drums, cracks, deformations, etc. may occur. In particular, new walls and new ground leveling are required. The wall holes shall be solid, square, and vertical. , Drying; The ground should be level, dry, no sand, hollowing and cracking should be controlled within the scope of quality requirements, and the flatness conforms to the pavement requirements; Of course, if you first install the floor and install the door, you will have the following problems: 1. The door is relatively heavy and may cause damage to the floor. Workers walking around may scratch the floor. 2. There is a certain amount of wood dust and glue when installing the door, which will stain the floor. 3. Did not install the door, the floor kick line is not good to close. The solution is as follows: 1. Use a carton board and other materials to protect the floor covering next to the door before installation. 2. Workers can be required to cut materials into the corridors or balconies where they are well-cleaned to avoid large dust. 3. The skirting board can be installed without first installing the door and then loading it; or leaving a length of the baseboard of the door closer to the door frame for a certain length. Do not nail it to death. The situation saw the skirting board and installed it. Editor's summary: The above is the first to install wooden floor or first install the door, the public said that the public has a reasonable explanation of her husband, hoping to help meet the needs of the friends! For more information, please continue to follow our website. Follow-up will present more exciting content. You can also purchase more of your favorite products on Qijia Mall! Good Bamboo Flooring or Wooden Flooring Good Wooden Flooring or Tiles Good Bedroom Wood Flooring or Tiles Good Wood Flooring How to Choose Wooden Flooring Mats
Petrolatum Tape
I System description:
The Anticorrosion system includes four parts: seal paste, putty (mortar), tape and protection band. This is based on the principle of hydrophobic oil and oily to constitute oily protection layer with a few continuous layers on the surface of work piece, so that the equipment is always to stay in seal condition of oil film which is impossible to be peeled or cured, especially in moisture or under water or in ground environments. The flexibility feature of the system without curing, hardening and cracking is able to adapt thermal expansion and shrinkage of work piece for long term seal protection. The system is able to resist erosion of inorganic acid, alkali and salt and has good electric insulation nature. The operation of AC oily fiber anticorrosion tape is easy to operate; it can be operated in water and moisture surface directly, which is other kinds of anticorrosion can`t accomplish. No volatile toxic and harmful components are in the system in conformity with strict international requirement for environment protection.
â…¡ Product feature:
Easy application-Installation fast and easy-simply remove the release film and press onto the substrate.
Superior adhesion capabilities-Creates a strong bond to the substrate for long-lasting waterproofing Protection.
Excellent sealing performance-It seals around fasteners, allowing no water to penetrate and get to the substrate.
Highly conformable and flexible-Can accommodate settlement and shrinkage movement.
Long-lasting waterproofing protection-It creates a water and moisture barrier that does not degrade from the effects of the environment.
â…¢ Technical Datas:
Offshore Pipeline Petrolatum Tape Offshore Pipeline Petrolatum Tape, Grease Fiber Anti-corrosion Tape, Ship Petrolatum Tape, Offshore Pipeline Petroleum Tape Jining Xunda Pipe Coating Materials Co.,Ltd , http://www.pipe-wrap.com
