Wallpaper, because of its fashion and diversity, has gradually become the new darling of the decoration industry, more and more people choose to use wallpaper to decorate the walls of the home. But for a long time, if you do not pay attention to daily maintenance, various problems will be exposed: wallpaper upturned, yellow, blistering, broken ... ... then, how to deal with these conditions? In the daily maintenance of the wallpaper we have to pay attention to what issues? Question one: wallpaper tilted The corners of the wallpaper always like different degrees of tilting. Pressing them and pressing them down doesn't work. It's time to glue and seem to listen and take time and effort. What is the actual cause? In general, there are two cases of warping: the corners start to curl and the middle drums. One of the reasons for the curling of the corners is the process problem. When attaching wallpaper, the seam should be left on the plane instead of on the corner. If the seam is left on the corner, occasional collisions and friction will cause warping. The other reason is that the grass roots have not been handled well, and dampness and exfoliation will cause the corners to warp. Drums are mostly due to uneven hand-gluing, a small amount of air left in the wallpaper, summer air expansion, resulting in bulging; and then the wall damp bulge phenomenon, the more prominent problem is that the bathroom wall waterproof shower did not do a good job , make the wallpaper on the other side of the wall damp, drumming phenomenon. Maintenance coup: If the grassroots wallpaper off, you can first dry the wall with a hair dryer, apply flattening with wallpaper glue. If the wall putty layer falls off, repair the putty layer first. To deal with the drum phenomenon, it is best to find an empty needle, pierce and poke into the bulge, and then draw dry air, and then fill with wallpaper glue from the original hole into the press flat. If it is the wallpaper on the other side of the toilet wall, it is necessary to ask professionals to re-wall waterproof to solve the problem of dampness. Question two: wallpaper yellow The yellowing of wallpapers generally has the following three methods: 1. If the wall ash at the time of check-in is wall-papered, the alkaline material in the wall ash may easily react with the bottom of the wallpaper, causing the surface to appear yellow. This phenomenon is more difficult to handle, and the wall surface needs to be removed and re-constructed. ; 2. If yellowing occurs after living for several years, most of them are caused by the aging of paper due to exposure to sunlight and air. At this time, you can use “safely-bleached water†to wipe on the towel and wait for half an hour before use. Wipe again with clean water, first make a small test at the concealed part of the wall, observe the effect, and if the effect is satisfactory, it can be used as a whole wall treatment; 3, if smoked and part of the yellow, it is appropriate to dilute the caustic soda wipe. Wallpaper home wallpaper
The Clinker Exterior Tile surface is unglazed, the front
and the opposite are the same in color and material. The surface of the Clinker Wall Tile is slightly rough. This special
appearance gives the Clinker Porcelain Brick a
retro style, and it will have an elegant and simple feeling when used outdoors.
Small Exterior Wall Tile size: 45x95mm, 45x195mm, 60x240mm, 60x108mm, 52x230mm, 140x280mm...
According to the
tile surface shape, it is divided into plane, corrugated surface, split brick
surface, stone surface, etc.
Advantage of Small Exterior Tile
1. The rough
surface of the clinker tile is very soft
under the illumination of the light, it is not glare, and it will not cause
light pollution to the surrounding environment. Split exterior
tile are often used in some retro-style finishes, architectural
exteriors or creative designs.
2. The small
size exterior tile has very good wear resistance and anti-slip property. The
particles on the surface are very fine, so the water absorption rate of the clinker
wall tile is very low, and the anti-permeability and moisture resistance are
very strong.
3. It has the
characteristics of easy cleaning, good weather resistance, low maintenance cost
and a long service life.
Construction
attention
1. In order to
prevent emptying and falling off, the base layer of the wall must be cleaned
and splashed with water.
2. The clinker
tile and the base body must be firmly adhered, free of hollow drums, no skew,
cracks and other defects. The joints are densely packed, straight, wide and
narrow, uniform in color, and the pattern is butted.
3. Pay attention
to the joints and clean the surface after the joint material has hardened.
Clinker Exterior Tile Clinker Porcelain Brick,Clinker Wall Tile,Clinker Exterior Tile,Small Exterior Wall Tile,Small Exterior Tile,Split Exterior Tile UMS New Materials Industry Co.,LTD , https://www.ums-factory.com A common problem in the use of wallpaper and maintenance tips
1 23 Next> Total 3 Pages
Page to page