Speed ​​gate is an upgrade product of swing gate. Speed ​​gate is also called high-end swing gate. What is the difference between speed gate and swing gate? Xingshun Company will share it with you.

Swing gate: It is a kind of widely used channel equipment. The left and right sides swing, usually in the normally closed state, that is, the swing gate is in the middle, and the authorization signal is obtained. The gate swings forward to open, the pedestrian can pass, when the pedestrian is in the middle, the swing gate passes. The electrons fail to pass the inspection and the machine starts the anti-clamping function. The gate of the machine is not shut off. At the same time, the Xingshunan swing gate also has mechanical anti-clamping. Even if the electrons are broken, the mechanical anti-clamping can work at any time to ensure the safety of pedestrians. One important thing is that when someone slamming the gate and the external force collides suddenly, the ordinary swing gate will cause a bad swing or movement (determined by the size of the external force). The swing gate of the Xingshun An anti-collision movement is biased to one side and reset manually. , Play the role of the protection of the movement, illegal entry, the gate alarm. The limit of the swing gate is achieved by the proximity switch. The position of each stop of the proximity switch is not very accurate. Only the approximate position can be ensured by the four-slot position of the movement, but the biggest problem of this movement is serious wear and tear. Each swing, relying on the four-slot wheel sliding friction, it is recommended to use a particularly frequent occasions, this swing gate can not be applied, consider the speed gate or wing gate three roller gate.

Speed ​​gate: a new type of pendulum gate, also high-end swing gate, fast response, each gate opening time 0.4-0.5 seconds, speed can also be adjusted, the general speed is very fast, is an ordinary pendulum The gate is more than 2 times faster, allowing pedestrians to quickly pass through. This is a big advantage of Speed ​​Gate. It also has collision avoidance. The normal swing gate is not anti-collision, and it is the bumper movement that can crash, but it cannot be reset. It must be manually reset. , This is not very convenient, speed through the door to have anti-collision, automatic reset, the square brake suddenly encountered an external force, the swing arm will be in the direction of the force is cheap, eliminate the external force, the swing arm can automatically reset, easy and comfortable, if someone When the sluice gate is locked, the swing arm is automatically locked and the machine gives an alarm sound. The administrator finds the slam gate personnel based on the alarm sound. The voice prompts that the gate is normal, there will be voice prompts, there is a sense of intimacy, you can change the prompt mode. In the fire mode, the gate receives the fire mode signal, and the gate automatically enters into the fire mode state, which is suitable for emergency evacuation of personnel. It will not be arbitrarily closed in the middle, and the power off gate will be opened automatically. It meets the requirements of firefighting function, communication mode, 485 traffic and network communication. The gates are connected to the computer and can be remotely operated, remotely set up, and the network can be operated remotely. This is compatible with the Android and Apple systems, saving trouble and peace of mind.

The difference between the swing gate and the quick pass gate is as follows: 1. Drive mode: swing gate organic core, 4 wheel drive 4 slot brake, belongs to sliding friction, speed gate motor direct drive, solenoid valve clutch brake, without any friction. 2. Limiting mode: The swing gate is generally close to the switch or optocoupler signal, the contact area is large, the limit is not accurate, and the speed-through door adopts the encoder limit, which can be accurate to 1°, so the swing gate and the speed-through gate cannot be One grade. Many companies in the market talk about the current swing gates and small plates that act as speed gates, and the quality and performance of the gates are not up to the standard of speed gates. Appearance and speed pass through the door is no different, use it is a typical copycat version, so the majority of new and old customers read the above content will know, Xingshun An company to give you the real difference between the swing gate and speed pass, in the purchase When it comes to machines, it is not enough to buy a copy of the Sutong Express Door.

China Agglomerated Activated Carbon ,Coal Agglomerated Activated Carbon manufacturer, choose the high quality Coal Based Agglomerated Activated Carbon,Agglomerated Granular Activated Carbon, etc.

Activated Carbon is made of high-quality anthracite as a raw material. The shapes are columnar, granular, powder, Honeycomb, spherical, etc.. It has high strength, fast adsorption speed, high adsorption capacity, and larger surface area., pore structure is developed. The pore size is between Coconut Shell Activated Carbon and Wood Activated Carbon .
It is mainly used for high-end air purification, biochemical gas, chemical gas purification(such as mustard gas, sarin gas), exhaust gas purification, high-purity water treatment, wastewater treatment, sewage treatment, aquariums, direct drinking water purification, desulphurization, exhaust gas treatment, household exhaust gas(formaldehyde, etc.) purification , water treatment activated carbon denitrification and can effectively remove impurities and pollutants in gases and liquids, as well as the separation and purification of various gases, can also be widely used for the adsorption and recovery of various low-boiling point substances, deodorizing and removing oil.

 

Agglomerated Activated Carbon

Agglomerated Activated Carbon,Coal Agglomerated Activated Carbon,Coal Based Agglomerated Activated Carbon,Agglomerated Granular Activated Carbon

NINGXIA SINOTOPSKY INTERNATIONAL TRADING CO.,LTD. , https://www.nxsinotopsky.com