Sulphur Fertilizer,Magnesium Sulphate,Magnesium Sulfate Hebei Monband Water Soluble Fertilizer Co., Ltd. , https://www.wsfertilizer.com
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131"; Home>Bearing knowledge>Important method for the overheating of imported bearing workpieces "Rescue method for the overheating of imported bearing workpieces"
(1) Workpiece forging production; such as casting ratio. æ–© 露 露 露 æ’¸ æ’¸ 惨 惨 惨 惨 鱿 鱿 鱿 鱿 ё橹 ё橹 è© è© Îº κ ãœé©® ãœé©® ãœé©® ãœé©® ãœé©® ãœé©® ãœé©® ãœé©® ãœé©® ãœé©® ãœé©® ãœé©® ãœé©® ãœé©® ãœé©® ãœé©® ãœé©® ãœé©® ãœé©® ãœé©® ãœé©® /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
(2) The coarse workpiece arranged for the overheating of the attack; the method of forging and refining the grain can be used to eliminate the shortcoming; avoiding the appearance of the orange peel appearance when the workpiece is cold deformed; improving the appearance quality of the workpiece.
(3) Strictly control the casting heating temperature and heating and holding time of lcrl8Ni9]ri stainless steel box and flange parts; avoid the disadvantage that the workpiece is overheated and the workpiece has coarse grains.
(4) The heat treatment solution temperature of the imported bearing workpiece should not be too high; the heat preservation time should not be too long; the heating temperature should not be higher than 1150"C; the heat preservation time should be calculated at 1 l_5min/mm.
Recommend to friends comments close window Bearing related knowledge Stepper motor of bearing grinding machine and its control system The advantages of rolling bearing are compared with the specification of bearing lubricating oil.
TIMKEN bearings: common damage methods
Detailed method for determining whether NTN outer spherical bearings should be repaired
This article links to http://
Please indicate the bearing network http://
Previous:The fundamental production process of bearings Next: Bearing professor teaches you smooth protection bearings
Source: China Bearing Network Time: 2013-11-16
Sulphur is essential for the formation on amino acids, the building blocks for proteins which are needed for growth and development in plants and animals.Again S is required to convert Nitrogen to plant dry matter. As grass grows both Sulphur and Nitrogen are used together so a Sulphur deficiency will decrease nitrogen use efficiency and so reduce yield. Thus, Sulphur is an important nutrient for grassland and is closely associated with Nitrogen uptake and efficiency.