/*kangxianyue 250*250 was created on 2017/3/29*/ var cpro_id = "u2939694";

According to a new study by the University of Exeter, tiny plastic particles contaminating the ocean not only enter the marine organisms orally, but also enter the body system through the sputum.

Scientists have also discovered that when plastic particles are inhaled in this way, marine organisms need to spend six times longer than normal digestion time to get the plastic particles out of the body.

Dr. Andrew Watts of the University of Exeter said: "Many studies on plastic particles have only considered the way in which plastic particles enter the animal. The results we just announced include other ways, such as ventilation. The crab has not been tested for experiments, but the results also apply to other crustacean mollusks and fish and those that use the same structure to ventilate the fish."

From an ecological point of view, this is very important. If these plastic particles remain in the animal for a longer period of time, these plastic particles are likely to enter the top animal of the food chain.

The researchers used fluorescently labeled polystyrene microspheres to show how the ingested plastic particles remained in the tissues of common coastal crabs. Multiphoton imaging showed that most of the microspheres were stuck in the hairy bristle structure of the crab. After being retained in the foregut.

commercial plywood is the basic wooden product for furniture, is one of the biggest wooden products, is used for plane, boat, train, bus, construction and package etc. It is the one of the main way to save wood resource and improve the usage of wood.Usually poplar, pine, combi, hardwood as the core, the bace&back are the Veneer surface, such as Okoume, Bintangor, Pine, Birch, Poplar, Pencil cedar, Maple, Cherry, White Oak, Sapele, Beech, Red Oak, Ash etc.

LULI Group Corp. Ltd, well known as the leading manufacturer for wooden, steel and paper products, located in Shouguang, Weifang, Shandong, China. Since the foundation in 1985, it focus on the production of Commercial Plywood, venner, MDF , Particle board , Door Skin , Blockboard , Finger joint board, OSB , paper, Steel etc. And we have High Quality Commercial Plywood.

Advantages:

1.High bending strength

2.Strong nail holding

3.Moisture-proof and easy work

4.Tight construction and high strength

5.No ratten or decay

6.Low formaldehyde emission

7.The productions are suitable for the construction of viaduct and tall frame building

8.If put in boiling water for 48 hours,it still glue sticking and still formed

9.If used abide by illustration strictly,it can be reuse more than 50 times

10.Solve the problem of leaking and rough surface during construction process.Particular suiltable for watering concreat.

Commercial Plywood Details:

size:1220*2440mm 1220*3000mm 915*1830mm 1250*2500mm, according requirement

thickness:2mm-60mm

core:poplar/combine/hardwood

glue:MR/E2/E1/E0/melamine/WBP

kinds:okoume,bintangor,pine,birch,poplar,cedar,ect.

certification:CARB,FSC,CE,JAS,ISO9001,ISO14001

commercial plywood

commercial plywood

Commercial Waterproof Plywood,Commercial Furniture Plywood,High Quality Commercial Plywood,Commercial Bamboo Plywood

Luli Group Co.,Ltd. , https://www.cnluli.com