Do not pursue thick plates. The thickness of the sheet is mostly 0.8-1.2 mm on the market. When selecting a stainless steel sink, although the thickness is very important, the thickness of the sheet cannot be pursued blindly. In general, the sheet of 1.0 mm thick sink is sufficient. Too thick, too high strength is not necessarily a good thing, such as accidentally dropping the bowl into the sink, the result is too high hardness of the sink to break the bowl. The depth of the sink depends on the cabinet space. The slotting depth of the sink is also an important factor related to its price. The deeper the slot is, the higher the cost is. However, consumers should pay attention to the space of the cabinet when purchasing. In addition, the larger the space inside the water tank, the higher the utilization rate, and the utility of such a water tank is also better. The production process is also about price. The price of the surface of the sink, such as drawing, polishing, pearl silver, etc., will vary. The sink made by the polishing process is relatively inferior in wear resistance; the drawn product performs much better in this respect. The pearl silver sink looks like a higher grade, but the process is not easy to identify. For example, the product with a silver coating on the surface is not as good as the ordinary stainless steel sink. The flatness and smoothness of the surface of the sink are the established factors for selecting a good sink. Choose a flat, smooth one. If the surface is raised or has a convex or concave surface, do not choose it. Use a magnet for inspection. Although the magnet cannot determine the quality of the stainless steel product, the non-magnetic one cannot be determined to be good stainless steel, but the magnetic one must not be a good steel. Accessories are small and important. Another very important factor in choosing a sink is the accessories. The good and bad of the fittings are directly related to the cost of maintenance in the future. The sealing degree and corrosion resistance of the lower water pipes are the main factors that determine whether the water leaks in the future; Extrusion seal, table-controlled dewatering (that is, a device with a knob on the sink surface to control sealing or drainage), overflow device, and muffler series are all standards for measuring the quality of accessories. All need special attention. Concerned about surprises Label: kitchen sink Previous: What kind of effect can the door and window hardware play on the door and window? Next: Precautions for the use of woodworking saw blades High Velocity Powder-Actuated Tool is used for normal concrete not harder than C40. The nail initial velocity is very high as there is no piston but high pressure gas to push it. High Velocity Powder-Actuated Tool High Velocity Powder-Actuated Tool ,Powder Actuated Tool,Powder Actuated Fastener Tools,Powder-Actuated Insulation Tool Yibin Heheng Technology Co.,Ltd , https://www.chinadirectfastening.com