When there is a stain on the surface of the car wheel that is difficult to remove, a professional cleaning agent is used. This cleaning agent can gently and effectively remove the stain and reduce the damage to the surface of the aluminum alloy. When there is a stain on the surface of the car wheel that is difficult to remove, a professional cleaning agent is used. This cleaning agent can gently and effectively remove the stain and reduce the damage to the surface of the aluminum alloy. In addition, the car wheel itself has a metal protective film, so pay special attention to the use of paint brighteners or other abrasive materials. Care should also be taken during driving to avoid scratching the hub caused by scratches. Once scratches or deformations, they should be repaired and repainted as soon as possible. When the car is in the new car, it is necessary to wash the rim. The vehicle that is driven every day should wash the rim at least once a week. After flushing with clean water, brush it with a detergent and then rinse it with plenty of water. If the car has been driving for a while, and usually does not work hard to clean and maintain, a hard brown dark coke has formed on the rim, then use a more powerful rim cleaner. It is necessary to remove the coke. After spraying the special cleaning agent, you must wait for a while, let the solvent soften and coke, then brush it off with a sponge or a coarse cloth, then rinse it with water. Choose a refreshing shape, convenient maintenance, pay attention, do not be impatient, some serious coking needs two or three cleaning actions before there is a way to completely remove. People who don't like to take care of their own cars, it is best to choose a sleek look at the beginning of the car, choose a "clean" shape that is simple and clear, does not have too many complicated structures, and does not have a bunch of small screws. It's easier to get up. The following are the specific steps for repair: 1. Check the scars. If there is no damage to the inside of the hub, you can simply repair it, use the paint dilution, wipe the scar around, and remove the dirt. 2. It is difficult to remove the dirt in the deepest part of the scratch, and you can use a toothpick to clean it thoroughly. 3. In order to prevent accidental application of the unrelated part of the paint, it is best to carefully stick the adhesive tape around the scar. 4. Arrange the tip of the brush and apply the lacquer. After the lacquer is dry, shrink it slightly. It is best to spread it slightly. 5. After painting, it takes about a week to completely dry. After drying, apply with soapy water on a water-resistant paper to smooth the surface. 6. After wiping with water-resistant paper, wipe off the light with a mixture and then wax. For deeper scars, the focus is on observing whether the metal surface is exposed. If the metal surface is not visible, it will not rust. You can concentrate on the lacquer. Use a pen tip to pick up the spot and wait until the paint is completely dry. Daily cleaning and maintenance is also indispensable. When the temperature of the hub is high, it should be allowed to cool naturally before cleaning. Never use cold water for cleaning. Otherwise, the aluminum alloy wheel hub will be damaged, and even the brake disc will be deformed to affect the braking effect. In addition, cleaning the aluminum platform gold hub with a cleaning agent at high temperatures will cause a chemical reaction on the surface of the hub, which will lose its luster and affect the appearance.
Main Features:
WDR,Waterproof IP66,Built in IR-CUT Switch in Day & Night Vision
Support 3D DNR, DWDR;
Support ONVIF;Support Third-party NVR;
Support for mobile video surveillance(iOS,android);
Support Web, CMS, platform management software MYEYE;
Support cloud service, network penetration, alarm information pushed.
When the hub is covered with hard-to-remove tar, if the general cleaning agent does not help, try to remove it with a brush, but do not use a hard brush, especially an iron brush, to avoid damaging the hub surface. Here, the private car owners are introduced to a remedy for removing tar: that is, using a medicinal "active oil" to rub, you can get unexpected results, give it a try. If the area where the vehicle is located is wet or close to the waterfront, the hub should be cleaned to avoid corrosion of the aluminum surface by salt. After cleaning, if necessary, the hub can be waxed and maintained to keep its luster forever.
Http://?&fid=54&id=1992
For more information, please pay attention: autohao128
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
IR Network Camera Another name including:
Infrared Ip Camera,Ir Ip Camera,Ptz 4Mp Camera,Ir Fixed Dome Network Camera,Starlight Dome Camera Ip Dome Camera ,Dome Ip Camera Outdoor, Poe Dome Camera
IR Network Camera
Ip Dome Camera,Poe Dome Camera,Ptz Ip Camera Outdoor,Dome Ip Camera Outdoor
Shenzhen Sanan Technology CO.,LTD , https://www.sanan-cctv.com