Leakage of the faucet is a common problem at home, especially the loss caused by the leakage of hot and cold water faucets, and the use of electricity and water has a certain degree of waste. In the home life, have you ever encountered a leak in the faucet? Then what about the faucet leaking? Look for a repairman to solve it. Although this is a solution, it will take a certain amount of time. In fact, we can do it ourselves. Prepare tools to master the method, Jiuzheng Building Materials Network teaches you to easily solve the problem of water leakage.

Hot and cold water faucet leakage maintenance preparation tool: a flat-mouth medium-sized screwdriver, a movable wrench with an opening of 30-50.

Hot water faucet leak repair specific steps:

1. If the hot and cold water faucet is controlled by a total water inlet valve, close the main valve. When the hot and cold inlet pipes are separated, then the corresponding two valves are closed;

2, use a flat-blade screwdriver to open the accessories "01 hot and cold standard (handle fixed screw hole plug)";

3, use a flat-blade screwdriver to extend into the handle to fix the screw hole plug (cold hot mark hole), counterclockwise (left-handed) screwdriver about 3 turns;

4. Grasp the handle of the faucet with your left hand and pull it upwards. At the same time, use the rear end handle of the screwdriver (must be non-metallic material, otherwise it will damage the outer surface of the faucet), so that the accessory “02 water outlet handle” is separated;

5. Counterclockwise (left-handed) fitting "03 end cap", the end cap is separated from the main body;

6. Place the top of the adjustable wrench in the hexagonal position of the “04 core tightening hex sleeve” of the fitting, adjust the opening size of the adjustable wrench, rotate counterclockwise, remove the ceramic valve core to check, if it is good, clockwise (right-handed), tight Fix the strength; if it is damaged, replace the new valve core;

7. Replace the accessories “03 end cover”, “02 water outlet handle” and “01 hot and cold standard” (note that red represents hot water side and blue color represents cold water side).

Jiuzheng Building Materials Network warm reminder: If the faucet is found to have less water, it may be a leak, because the single-gun faucet's water-stop disk is stuck with sand, this phenomenon is still looking for a professional repairer to disassemble the faucet, but If the pad is damaged, it must be replaced. The faucet in the hot water section is easy to reduce its life due to heat and cold shrinkage. Therefore, it is generally recommended that the hot and cold pads be replaced at the same time.

Function:


1) With the solid brass and elegant apperance, this shower column is ready to function at any time when you turn on the switch.


2) Water can come out at any angle that you can imagine; the adjustment to the heat or the volume of the water is totally easy to operate.


3) An innovative and remarkable product like this is absolutely worth buying and keeping, cause it will always be there for you.


4) The philosophy is simple -- to make taking shower more playful and enjoyable!

Shower Column Set

Shower Column Set,Luxury Shower Set,Multifunction Shower Set,Twin Shower Set

KaiPing HuiPu Shower Metalwork Industrial CO,LTD , https://www.hp-shower.com