.25 Caliber Power Loads include
S43 Series .25 Caliber Single Shot Loads - Long - Size: 6.3x16 mm
S42J Series .25 Caliber Plastic 10-Shot Strip Loads - Size: 6.3x10 mm
S42G Series .25 Caliber Metal 10-shot Disk Loads - Size: 6.3x10 mm
.25 Caliber Power Loads Ramset Power Loads,Powers Metal Disc Loads,Metal Disc Loads,Low Velocity Strip Loads Sichuan Nanshan Powder Actuated Fastening System Co., Ltd. , https://www.nanshanpat.com
This "H" shaped stainless steel profile serves as the frictional transmission surface of the conductive block in the conductor. The inserting process guarantees the close integration of the stainless steel and the aluminum profile. The electric current introduced into the aluminum profile is kept in contact with the stainless steel body. The guide block in the conductive device transmits the current in the friction contact, which ensures the continuous current of the hoisting machinery during operation.
Conductive slide wire along the longitudinal direction of the slide wire is protected with ABS plastic as a whole, except for the contact between the lower opening portion and the conductive member. Therefore, the contact wire does not have a conductive exposed portion after installation, which brings great convenience for installation and maintenance, and at the same time Molded case protection (except for the opening), so that the trolley wire does not have the function of dust accumulation and rain, dew, ice and snow invasion, the connection between the guide rail and the guide rail is a special guide rail connector that can make the guide rail and the plastic housing In the same period, the connection is also safe and reliable.
Well, today's H-type unipolar safety wireline installation analysis is here, want to understand our single-pole / multi-pole safety wireline development, production, sales and construction information, please contact us. 
H-type unipolar safety trolley wire, whose conductive body is an aluminum profile with “H†profile, so it is also called “H†type energy-saving slide wire device. Energy saving is relative to the trolley wire with angle steel as the main body. Loss during transmission is greatly reduced. The electrical resistivity of aluminum is much lower than that of steel, and its specific gravity is small. Rolling aluminum into the “H†type is based on ensuring a certain conductive cross-sectional area to improve overall rigidity and strength. However, aluminum has a low surface hardness and is not wear resistant. In order to make the aluminum substrate meet the practicality as a conductive slide wire, the “H†shaped middle beam is made into an upper arch type, and a stainless steel section with high wear resistance is embedded here according to a prescribed process procedure.