Antistatic Clothing,Anti Static Workwear,Anti Static Cloth,Anti Static Overalls Xinxiang Worldbest Patron Saint Co., Ltd , https://www.xxhyhsworkwear.com
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131"; Home>Bearing knowledge> Common terms and definitions of bearings (3) Common terms and definitions of bearings (3)
2. Axial contact bearing /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
A thrust bearing with a nominal touch angle of 90°.
3. Angular touch thrust bearing angular contact thrust bearing
Thrust tumbling bearings with a nominal touch angle greater than 45° but less than 90°.
4. Single direction thrust bearing
A thrust tumbling bearing that can only accept axial loads in one direction.
5. Double direction thrust bearing
A thrust tumbling bearing that accepts axial loads in both directions.
6. Double row double-direction thrust bearing
Two-way thrust tumbling bearings with two rows of tumbling bodies; each column receives axial loads in only one direction.
7. Linear (motion) bearing linear(motion)bearing
Two rolling bearings have a relatively linear rolling bearing in the rolling direction.
(4) Ball bearing 1. Ball bearing
The roll body is the ball's roll bearing.
2. Radial ball bearing
1. The roll body is the radial roll bearing of the ball.
3. Deep groove ball bearing
Each ferrule has a centripetal ball bearing with a groove-shaped raceway having a cross-section of approximately one-third of the circumference of the ball.
4. Filling groove ball bearing filling slot ball bearing
Fill a groove on each rib of each groove of the grooved ball bearing; in order to be able to fill more balls.
5. Lock ball bearing counterbored ball bearing
A grooving ball bearing with a rib on the outer ring or some removed.
6. Three point touch ball bearing three point comtact ball bearing
Single-row angular touch ball bearings are subjected to pure radial load; each loaded ball has two touches with one channel; and one touch with the other. Under pure axial load; each ball and each A channel is just a touch.
7. Four point contact ball bearing
Single row angular touch ball bearings; when subjected to pure radial load; each loaded ball and two channels each have two touches; and when subjected to pure axial load; each touch is only a little touched.
8. Thrust ball bearing
1. The roll body is the thrust roller bearing of the ball.
9. Single row double direction thrust ball bearing single row double-directino thrust ball bearing
Four-point touch ball bearings with a touch angle greater than 45°.
10. Double row one-way thrust ball bearing doubel row single-direction thrust ball bearing
A one-way thrust ball bearing with a double volleyball concentric raceway and receiving the same direction load.
Recommend to friends comments close window Bearing related knowledge Rolling bearing bearing equipment and sub-components foreign bearing data Why the bearing will damage the characteristics of polymer oil-bearing bearings
This article links to http://
Please indicate the bearing network http://
Previous: Analysis of outer spherical bearings Next: Viewing and troubleshooting of bearing operations
Source: China Bearing Network Time: 2018-03-08