Our Polyurethane Ceiling Roses have Various designs with flower or without flower, You may decorate one piece on the ceiling, or use Polyurethane Ceiling Rose as a decorative ornament for the ceiling or wall, Polyurethane Ceiling Rose breaks up large ceiling surfaces and light up your room. you may paint Polyurethane Ceiling Rose to combine your funiture color, this series goods give you complete new decorative room!
Our PU Ceiling Medallion collections are modeled after original historical patterns and designs. Our artisans then hand carve an original piece. Being hand carved each piece is richly detailed with deep relief, sharp lines and a truly unique touch. That master piece is then used to create a mould master. Once the mould master is created we use our high density polyurethane foam to form each medallion. The finished look is a beautifully detailed, light weight, solid construction, focal piece. The resemblance to original plaster medallions is achieved only by using our high density urethane and not vacuum formed, plastic type medallions. Medallions can be cut using standard woodworking tools to add a hole for electrical or a ceiling fan canopy. PU Ceiling Medallions are light weight for easy installation. They are fully primed and ready for your paint.
Advantages of Ceiling Rose, Ceiling Domes, Ceiling Tiles , Ceiling Rims ,PU Ceiling Rose,PU Ceiling Medallion :
1. Elegant European style.
8. Labor efficient
Our Service: Polyurethane Ceiling Roses Ceiling Roses,Ceiling Domes,Ceiling Tiles,Foam Ceiling Rim,PU Ceiling Roses,PU Ceiling Medallions,Arc Mouldings,Curved Moldings,Oval Ceiling Medallions Suntronic New Materials Technology Co., Ltd. , http://www.dsmdecor.com
The hardness of high-hardness thermal spray coatings such as high-temperature alloys and special ceramics is generally above 1000 HV0.2, and the coating thickness is between 0.1 mm and 0.5 mm. The thermal spray coating is hard and thin. In the grinding process, due to the high hardness of the thermal spray coating, diamond grinding tools are often used. However, due to the use of diamond-solid grinding-grinding wheel grinding, not only the power consumption is high, the grinding temperature is high, the workpiece is easily burned, and the surface and intrinsic quality of the workpiece are affected. Moreover, it is necessary to regularly trim the grinding wheel and it takes time. The use of ordinary abrasive grinding wheels and abrasive belt grinding, because of its low hardness, its cutting efficiency is lower or difficult to grind (see Table 1, Mohs hardness table for various substances).
Table 1. Mohs hardness table for various substances 
The surface quality of the diamond abrasive belt grinding workpiece is high, mainly in the phenomenon of small surface roughness, good residual stress state, and no micro crack or metallographic structure change on the surface. From the surface roughness point of view, the abrasive belt grinding has reached Ra0.01, which has achieved the effect of mirror grinding, and it is very easy to achieve the roughness value above Ra0.1mm. The test shows that when the other conditions are certain, when the linear speed of the abrasive belt is increased from 35m/s to 100m/s, the surface roughness of the grinding is reduced from Ra2.0μm to Ra1.5μm, and the precision is not achieved by ordinary abrasive tools. . Therefore, diamond abrasive belts and their derivatives are the best products for grinding high hardness thermal spray coatings. 
    Second, diamond sand belt grinding processing plan and grinding process selection
Diamond sand belt is mainly used for the processing of rolls and shafts. Diamond grinding discs and diamond impellers are mainly used for grinding and polishing of planes, curved surfaces and complex profiles.
    (1) Diamond sand belt grinding processing thermal spraying layer scheme 
540mm diameter × length 15m ceramic piston rod grinding processing plan
Process parameters of 540mm×length ceramic piston rod grinding process
Lathe model: 61125
Belt speed: 16m/s (1500rpm)
Belt specification: 60mm × 1950mm
Belt contact workpiece method: soft contact (non-contact wheel grinding)
Workpiece specifications: diameter 540mm × length 15m
Workpiece speed: 30 rpm
Grinding head speed: coarse grinding 60#, 200#, 2mm-3mm/rev; fine grinding 800#, 0.5mm-1mm/rev
Coolant: water
Workpiece spray material: ceramic coating
Spray coating thickness: 60μ
Initial roughness of spray coating: Ra0.4mm-0.6mm
Spray coating processing allowance: 25μ
After processing thickness of coating: 35μ 
 (II) Selection of grinding sandstone grinding process parameters 
Figure 4, diamond abrasive belt grinding process flow chart
According to the above diamond belt grinding process (see Table 2, diamond belt grinding process parameter table), the grinding diameter of 540mm × length 15m ceramic piston rod, the grinding time is only 90 hours. In the first grinding process, due to the unreasonable design of the processing technology, the grinding time is as long as one month. 
    (III) Characteristics of diamond sanding belt grinding processing plan
1. Advantages:
(1) The equipment is simple, easy to operate, and does not require expensive special grinding machines. It can be installed on the lathe tool holder of common specifications to work.
(2) The grinding and polishing speed is fast, the efficiency is high, and the grinding effect is good.
(3) Because of the special orderly arrangement of diamond particles on the surface of the diamond abrasive belt, the grinding is sharp and the chip removal is good, and no trimming is required. Processing requirements can be achieved by replacing abrasive belts of different sizes.
2, disadvantages:
The precision of such non-contact wheel grinding is slightly lower (in terms of cylindricity). If the contact wheel type grinding and polishing (contact wheel hardness 90) is used, the machining time can be greatly shortened and the machining precision of the workpiece can be achieved.
    (4) Determining the time and quality factors of processing:
1. The quality of the spray coating: the uniformity and roundness of the coating thickness, the uniformity and apparent quality of the surface roughness, the uniformity of the hardness, the porosity of the coating, and the microhardness.
2. Operator's operation level and operating habits: such as the feed pressure of the belt grinding head. 
Plane and curved thermal spray coating
Some of the most advanced grinding methods are used in automotive stamping dies, steam turbine blades and aerospace components.
Diamond impeller grinding plane and curved surface: installed on pneumatic and electric mill, rotating speed 10000 ~ 20000rpm, high grinding efficiency, good effect, flexible and convenient operation.
Diamond grinding disc grinding plane: It is used on pneumatic and electric angle grinders. It has fast grinding speed and good smoothness. Â
Diamond torque disc: 2 inches in diameter, 200#, 400# in high-speed pneumatic tools, tools, compact, flexible, fast loading and unloading.
Diamond impeller, grinding disc, torque disc product (see Figure 2, several common diamond abrasive belts and products) The most important characteristics of the grinding coating are: structural design flexibility, high hardness of diamond abrasive grains, sharp grinding, rigid and soft phase In addition, the coating will not be penetrated, and the surface is evenly polished and the consistency is good. 
Figure 8. After polishing with a 180-mesh diamond thousand impeller, Ra 0.6-0.7 
Figure IX, polished by 400 mesh diamond thousand impeller, Ra < 0.3 
    Third, the conclusion
At present, compared with advanced countries, China's thermal spray coating processing technology is still relatively backward. Most factories in China still use diamond grinding wheel and diamond film vibration polishing process, which has low efficiency and is processed by diamond abrasive belt. There is no corresponding belt machine tool to match it, which has become the bottleneck for the promotion of diamond belt grinding technology. We have developed a belt machine that successfully cooperates with the lathe. We believe that through our unremitting efforts, we will make our own contribution to the adjustment of the industrial structure and innovation of the thermal spray industry in China. (Author: Zhengzhou Reiter Diamond Belt Co., Ltd. An Jianmin)
2. Many models to choose from.
3. Suitable for both DIY and construction projects.
4. Superior to Gypsum moldings.
5. Light weight, easy to transport and install.
6. Elaborate patterns.
7. Better flexibility.
1.Factory direct sale with excellent quality, reasonable price and first-class service.
2.Timely delivery to every corner of the world.
3.Strong supply capacity, high-tech skills and advanced equipment can surely meet customers` requirement.
4.Launching new designs for each category every year.
5.Exquisite workmanship. All products 100% inspected.
6.Preferential freight by Famous shipping company.
7.Excellent after-sales service.
Abstract 1. Diamond abrasive belt and its grinding characteristics The hardness of high-hardness thermal spray coatings such as high-temperature alloys and special ceramics is generally above 1000HV0.2, and the coating thickness is between 0.1mm-0.5mm.
       1. Diamond abrasive belt and its grinding characteristics Microhardness of carbide and several abrasives
Figure 3, 540mm diameter × length 15m ceramic piston rod grinding processing site
Table 2 Diamond abrasive belt grinding process parameter table
Figure 7 Diamond Thousand Wheels Polished Coating Photo
With the development of modern technology and industry, the performance of materials is increasingly demanding, wear-resistant and anti-corrosion is an important indicator. Some electroplating products, such as piston rods, due to the chrome plating process and the corrosion resistance of the chrome layer, are polished and sealed after spraying the ceramics, which greatly improves the corrosion resistance and service life of the piston rod. Plasma spraying technology is an effective means to obtain functional coatings on the surface of materials. It has the advantages of high production efficiency, good coating quality, wide range of materials for spraying, and low cost. Therefore, in the past ten years, the advancement of this technology and the production and application have developed rapidly, and it has been widely used in nuclear energy, aerospace, shipbuilding, petrochemical, machinery and other fields. In the welding technology science, thermal spraying technology such as supersonic and plasma, as a new high-tech industry, will play an increasingly important role in future material science research, it will replace some traditional welding processes and Materials to develop in a new direction. As a matching grinding technology, diamond abrasive belt and its derivatives are the best abrasive tools for processing high hardness thermal spray coatings. Figure XI. Several examples of thermal spray layer grinding of domestic mechanical parts: roll processing of sheet mills; processing of printing rolls; processing of oil drill pipes; processing of aircraft engine blades, etc.