The designer advises the owner to decorate the balcony, no matter what you do with the balcony, the quality of the balcony packaging will determine everything. If the aluminum window on the balcony is compared with the equivalent door and window on the wall, it is clear that the quality requirements of the former are much higher than the latter. Because the balcony is volleyed on three sides, several sides are subject to the wind, and the force is much larger than ordinary windows. In addition, many balconies were designed without considering the future packaging of the balcony. At the top of the balcony and the guardrail, there was no place for the window to “fallâ€. Therefore, it is very easy to accident if the installation is not good. If the balcony is not well sealed, it will leak in the cold winter, which will reduce the indoor temperature. If it hits a windy day, it will put a lot of dust into the room. The most troublesome thing is that when it rains, the seal is not tight. The sash will leak and wet the things on the balcony. Therefore, the quality of the balcony packaging project is critical and will be relevant to your future use. Attention insulation Renovation of the balcony should pay attention to thermal insulation, the balcony of the house, basically do not consider its insulation problem during the construction, because there is a balcony door and window inside the balcony can play a role of thermal insulation. However, many residents who have now remodeled the balcony have removed the door and window by considering the influence of the balcony and window on the overall living room. For the thermal insulation of the balcony, measures can be taken to use the polystyrene board to make the insulation layer below the balcony window. It is also conceivable to use the rock wool to make the insulation layer below the balcony window, and to form the balcony with the material with good thermal insulation effect. The insulation layer on the wall separates the exchange of hot and cold air inside and outside the room. Material also has a difference Generally, the balcony is made of plastic steel and broken bridge aluminum alloy. The difference is that the plastic steel window has good weather resistance, heat insulation and sound insulation effect are good, and the price is relatively affordable. Broken bridge aluminum window has superior performance: 1. Good heat preservation: the plasticity of the plastic in the aluminum-plastic composite profile is low, the heat insulation effect is 1250 times better than that of the aluminum material, and the airtightness is good. In the cold area, although the outdoor is minus tens of degrees, the interior is another world. 2. Sound insulation is good: its structure has been carefully designed, the joints are tight, the test results, sound insulation 30db, in line with relevant standards. 3. Impact resistance: Since the outer surface of the broken aluminum profile is aluminum alloy, it is much more impact resistant than the plastic steel window profile. 4. Good air tightness: multiple sealing strips are installed at each joint of the broken aluminum window. The airtightness is one level, which can fully exert the air conditioning and save 50% energy. 5. Good water tightness: The doors and windows are designed with rain-proof structure to completely isolate the rainwater from the outside, and the watertightness is in line with relevant national standards. 6. Good fire resistance: Aluminum alloy is a metal material and does not burn. 7. Anti-theft is good: broken aluminum window, equipped with excellent hardware accessories and advanced decorative locks, so that thieves can do nothing. 8. Maintenance-free: The heat-insulating bridge aluminum is not easily attacked by acid and alkali, will not turn yellow and fade, and almost no maintenance. When it is dirty, it can be scrubbed with water and cleaning agent, and cleaned as soon as possible after cleaning. 9. The best design: The heat-insulated bridge aluminum is scientifically designed and adopts reasonable energy-saving profiles, so it has been recognized and praised by the national authorities, which can add luster to the building. Why should we use tempered glass for balcony? Tempered glass is a safety glass that is heated and quenched by ordinary glass to double the strength of the glass. Tempered glass features: First, safety. After the glass is broken, it becomes a honeycomb-like broken obtuse-angled particle, which will not cause significant harm to the human body. The second is high strength. The strength of tempered glass is generally 4-5 times that of ordinary glass. The third is the deflection. It is 3-4 times larger than ordinary glass. Fourth, the thermal stability is good. The tempered glass has good thermal stability, can withstand three times the temperature of ordinary glass, and can withstand a temperature difference of 300 ° C (the glass area is small and there is no need to temper). At the time of acceptance, it is mainly to see if it is strict Generally, the balcony uses the casement window and the sliding window. It is required to close tightly, the gap is even, the fan and the frame are closely connected, the push-pull is flexible, the accessories are complete, the position is installed correctly, firm, flexible and applicable, and the appearance is beautiful. Core Veneer,Wood Veneer,Natural Veneer Linyi Chanta Plywood Co., Ltd. , http://www.lyplywood.com