Furniture painting “makes old†refers to the furniture painting, coating > paint coating, so that the furniture reflects the feeling of retro and return to nature, fully display the wood color. As it caters to the psychological needs of mankind to yearn for nature and return to nature, it is a trend of furniture development in the future and is currently prevalent in countries such as Europe and the United States. The “painting old†process of furniture painting mainly includes the processes of substrate destruction, material processing, overall coloring, fillers, primers, evacuation, coloring, color correction, secondary primer, topcoat, polishing and waxing. 1. Destruction of base material: Destruction is a processing procedure with strong antique effect in furniture painting process. It is mainly used to imitate traces of wind erosion, insect frogs, collision damage, and vandalism. Its role is to enhance the antique effect of the product, cover up the defects of the product and increase the value of the product. Wormholes - Wormholes are traces of wood that has been worm-eaten and infested after imitation products have been stored for a long period of time. In general, worms are more common in the destruction and decay of products and in the marginal areas. The places where the ganglia are located and the center of the wood are relatively rigid. Insects generally do not reach these places. The frogs are scattered in separate places. There is also a dense clustering phenomenon. Scratch marks - Razor marks are traces of imitation products pulled by zigzag objects during long-term use or storage. Horse tails, scars - horse tail marks also known as scratches, it is imitation products in the process of being scratched, scratching marks; scars are imitation products in the long-term use or storage process of insect worms, insects left after crawling Mark of. Iron hammer mark - Iron hammer mark is the trace left after being hammered at a certain angle with a hammer. It is mainly a sign that the imitation product is crush-pressed or dropped by other objects during long-term use. Spray point (also known as "fly black spots") - mostly black, dark brown, is a transparent or opaque coloring paint, commonly known as "flies black spots." It mainly simulates the excretion left by the flies on the products during the long-term use of the product or traces of some of the colored substances splashed on the products. It is a process with stronger antique effect. Cloth printing - cloth printing, also known as angiography, is a process often used in furniture painting process. Its main role is to enhance the product's sense of hierarchy, deepen the color of the product, and it will be introduced below to reduce the level of product color processing In combination, the product presents a light, medium, and deep color hierarchy. 2, material processing: due to the reasons for the color of the wood itself, can be mixed with dyes or pigments in the solvent, and then adjust the color of the material is consistent, the material can be adjusted bleaching agent and repair agent. Puddle paint paint furniture furniture retro furniture Children Tricycle Wheel,Pu Rubber Wheel,Plastic Rim Cart Wheel Yujiaxin Industry And Trade Co., Ltd. , http://www.pneumatic-wheel.com