Wine rack,stainless steel wine rack,Iron wine rack, wine holder,wine bottle rack
wire holder is made of high quality 304 stainless steel, It is easier to clean without rust, safe, healthy and durable, Prevent rust or chemicals from contaminating food and damaging health. Suitable for putting wire bottle.
China leading manufacturers and suppliers of Wine Holder,Wine Bottle Holder, and we are specialize in Wine Rack,Hanging Wine Rack, etc.
wine bottle rack,metal wine rack,wine display rack,Wine rack holder,honeycomb wine rack Shenzhen Lanejoy Technology Co.,LTD , https://www.grill-grid.com
Pump works in Asia mainly through the mechanical device to make the pump reciprocating motion within the diaphragm, with the continuous expansion of the use of the pump, pump installation and use of people also made more demands and doubt. Speaking of this, someone will certainly ask how to install the pump? Yes, how to install the pump? How to install the pump How to install the pump: Pump Each pump must be connected to a separate suction pipe, suction pipe length should be shortened to ensure that the pump can pump water to minimize the import of pipe Head loss, self-suction guarantee can reduce the probability of blockage of the suction pipe by impurities. The general design data of the pump pumping pipe flow rate is 1.5 m / sec, the minimum shall not be less than 0.7 m / sec, otherwise the inlet pipe is easy to have sediment accumulation. When the pump pumping pipe is relatively short, the pipe flow rate can be increased to 2.0 ~ 2.5 m / sec. In order to let the suction pipe air quickly be self-priming pump emptying, the pump suction pipe try not to turn or not tiled, try to use the direction from the pool to the pump from the low to the best slope, the best slope 0.005 degrees, if the pump suction pipe and pump connections need to be reduced diameter, you must use eccentric size head diameter. A sump mouth should be installed at the sucking mouth under the sump, the size of which is 1.3 to 1.5 times of the diameter of the self sucking sump. Pump pumping pipelines to send the liquid is sewage, the best pump on the pump should not install the bottom valve, because after the end valve is installed at the end of the valve is easy to be blocked, so prone to self-priming pump can not absorb the water fault, and easy Increase self-priming pump head loss caused by the phenomenon of reduced traffic. cippe Oil Show China International Petroleum & Petrochemical Technology and Equipment Exhibition video capture and post-production video Highlights: http://zhuanti.liuti.cn/cippe-vid/ This article belongs to Industrial Internet (Xiamen) Technology Co., Ltd. are welcome to reprint, reprint please indicate the source and author of: Asian pumps network (CEO QQ / micro letter: 18,189,528) editor: Coco (QQ / micro-channel: 97,129,096) starting: http: //beng.liuti.cn/ (hotline: 400-6030- 811)