Gin Pole Operations
On the documentation side on things, operator will need adequate details depicting the planned operational configuration(s) for the complete gin pole system to be used including:
•Gin pole mast
•Top lifting block
•Load and tag line sizes/configuration (including use of heel block, max load position angle, max tag angle, tag arrangement, etc.)
•Basket and bridle attachment to gin pole and supporting structure including associated hardware and sling sizes/config
•All relevant details pertaining to jumping/lowering the pole into position
•All relevant details pertaining to tilting the pole for operation (use of luffing block, etc.)
•Any other relevant details based upon user`s planned operational configurations for assembly, setting, jumping, arranging, lifting, and/or removal of the system
As pole manufacture MARSHINE we only address the gin pole mast and allowable load and tag capacities / angles based solely upon the mast`s rated strength. Affirming the pole was designed, built and load charts are in accordance with the ANSI/TIA-322 standard. Its operator responsibility to ensure they are in compliance with all regulations related thereto.
Complete records of pole inspections and record of Magnetic particle inspection shall be performed on 10% of the welded connections every 10 years.
Annual inspections reports shall be maintained for a minimum of two years.
All gin pole operations must be in compliance with the latest revision of ANSI/TIA-322 and the OSHA CPL 2-1.36
Maintain your required documents along with work plan, engineer sign off for each specific job.
ANSI/TIA-322 standard includes an impact factor of 1.7 for all gin poles using synthetic load lines.
Gin Pole storage racks for gin poles are recommended for safe transport, storage and return shipping for inspection service. These units protect and reduce the potential of damage from excess handling with forks etc.
Gin Pole Tower Gin Pole,Stringing Euqipment Gin Pole,Tubular Gin Pole,Aluminum Alloy Gin Pole NINGBO MARSHINE POWER TECHNOLOGY CO., LTD. , http://www.marshine-power.com
Production and sales grow steadily
From January to November, the total industrial output value of the machinery industry was 1,298.542 billion yuan, a year-on-year increase of 33.76%. The growth rate was 19.67 percentage points higher than the same period of last year and 0.06 percentage points lower than the previous month. The sales value of the whole industry was 1,528.382 billion yuan, a year-on-year increase of 34.09%. The growth rate was 20.08 percentage points higher than the same period of last year and 0.20 percentage points lower than the previous month. Although the growth rate of production and sales in the whole industry continued to fall, the rate of decline slowed down, and production and sales achieved steady and rapid growth.
From January to November, the production and sales rate of mechanical products was 97.55%, an increase of 0.23 percentage points over the same period of last year, but it was 0.08 percentage points lower than that of the previous month, and slightly lower than the national industrial product sales rate (97.7%). From the perspective of different enterprises, the ratio of production and sales of large enterprises was 98.7%, down 0.22 percentage points from the previous month; medium-sized enterprises were 97.13%, down 0.17 percentage points from the previous month; small enterprises were 97.15%, up 0.08 from last month. percentage point.
Construction machinery and machine tool industry are growing rapidly
The production of 12 industries in the machinery industry showed a growth momentum. Compared with the same period of last year, there were 5 industries with higher growth rate than the industry level, followed by engineering machinery, machine tool, automobile, internal combustion engine and mechanical basic parts industry, among which construction machinery and The machine tool industry has experienced outstanding growth in production. From January to November, it increased by 49.51% and 41.24% respectively, and the growth rate remained above 40%. However, there are 7 industries whose production growth rate is lower than the industry average. These industries are agricultural machinery, instrumentation, cultural office equipment, petrochemical general, heavy mining, electrical appliances and food packaging industries.
The growth rate of new products in individual regions has declined
From January to November, the output value of new products completed by the whole industry was 242.736 billion yuan, a year-on-year increase of 34.64%, and the growth rate was 14.79 percentage points higher than the same period of last year. In terms of provinces and cities, the growth rate of output value of new products is quite different. Among the 30 provinces and municipalities in the statistics, there are 26 years of growth, of which Shanxi, Zhejiang, Anhui, Fujian, Jiangxi, and Hubei are more than 50%. And Xinjiang. The output value of new products decreased year-on-year in Heilongjiang, Hainan, Yunnan and Qinghai provinces. The largest decline was in Hainan Province, which was down 51.78% year-on-year.
The cumulative growth rate of export delivery value has dropped slightly
From January to November, the export delivery value of the whole industry was 1,311.735 billion yuan, a year-on-year increase of 35.29%. The growth rate dropped by 0.13 percentage points from the previous month, continuing the trend of slowing down the cumulative growth rate of export delivery value since September. Among the different holding companies, mainly foreign-funded enterprises fell 0.78 percentage points from the previous month, while the cumulative growth rate of export value of state-owned enterprises and private enterprises increased by 2.71 and 0.07 percentage points respectively compared with the previous month.
Nearly 90% of the output of major products increased year-on-year
Among the 119 major products counted by CMC this month, 107 products have accumulated a year-on-year increase, accounting for 89.92% of all reported products; 86 of them have grown by more than double digits, accounting for 72.27 of all reported products. %. The output of 12 kinds of products decreased compared with last year, accounting for 10.08% of the reported products. The specific product completion is as follows:
First, the growth rate of small tractors, crop harvesting machinery, on-the-spot machinery and grain processing machinery increased in November compared with that of the previous month. The monthly output increased by more than 30%, especially for grain processing machinery and crop harvesting machinery. More than 60%.
Second, four of the five types of construction machinery products in the monthly report grew by more than 35% year-on-year. The fastest growth was shoveling transport machinery, up 57% year-on-year, with excavators increasing by 65.13% year-on-year. Concrete machinery with lower growth rate has also achieved growth of more than 10%.
Third, metal cutting machine tools and metal forming machine tools have maintained rapid growth, with a year-on-year growth of more than 22% from January to November. Among them, CNC metal cutting machine tools have grown significantly, up 67.93% year-on-year, and the growth rate has increased by 1.08 percentage points from the previous month. Since the beginning of this year, the growth of CNC system equipment has more than doubled.
Fourth, from January to November, the number of cars produced was 16.607 million, an increase of 33.12% year-on-year. The growth rate continued to show a high trend, but the rate of decline slowed down. From the growth rate of automobile production in the month, it increased by 5.04 percentage points from the previous month. The models with faster growth rate were multi-functional passenger cars and basic passenger cars, which were 19.31 and 7.13 percentage points higher than last month. The growth rate of sporty multi-purpose passenger cars and trucks has declined to a different extent than last month. The production of low-speed trucks continues to decline.
Fifth, the production of power generation equipment in the first 11 months was 112.92 million kilowatts, an increase of 10.37% year-on-year. The growth rate was 4.5 percentage points higher than that of the previous month. It was mainly driven by the high growth of wind turbines. The wind turbines increased by 71.40% compared with the previous month. Increase by 17.49 percentage points, of which the monthly growth reached 126.67%. The low-voltage switchboards and power station turbines in electrical products grew rapidly, up 81.68% and 53.75% respectively, and gas turbines fell 34.32%.
Since the beginning of this year, the economic operation of the national machinery industry has been generally good. From January to November, the production and sales of machinery industry showed a steady and rapid growth trend, especially the construction machinery and machine tool industry grew rapidly. The growth rate of new product output was higher than the growth rate of production and sales, but the cumulative growth rate of export delivery value continued to fall. Among the 119 major product output statistics collected by the China Machinery Industry Federation, there were 107 kinds of cumulative year-on-year growth, accounting for 89.92% of all reported product varieties.