Introduction: Today's machining has the following characteristics: multi-variety, small batch production; short delivery time; light weight, performance compounding, and increased complex shape products. Recently, the composite machining machine has changed from the original machining to the main machining, and the machining center has been used as a main body. Next page The adhesive strength also increase fast. It is the opposite when the temperature is low. So for bonding construction of large diameter pipes, adhesive and socket connection speed should be fast, in order to avoid the splice adhesive has dried up. UPVC Irrigation Pipe,UPVC Irrigation Water Pipe,UPVC Agriculture Pipe,Flexible UPVC Irrigation Pipe BAODING LIDA PLASTIC INDUSTRY CO., LTD. , http://www.ldsyplastic.com
In manufacturing, how to increase productivity is an eternal topic.
Today's machining has the following characteristics: multi-variety, small batch production; short delivery time; light weight, performance compounding, adding complex shape products. In order to meet this demand, a multi-tasking machine tool came into being. Since the composite machining machine is difficult to repair after failure, the after-sales service requirements for the manufacturer are improved.
Different forms of compounding
The meaning of a composite machining machine is to achieve a complete machining from the blank to the finished product on a single machine. It can greatly improve the efficiency of multi-variety single-piece and medium-to-small batch processing, and reduce the waiting time and multiple loading and unloading time caused by the conversion of processes between different CNC machine tools. Usually these times account for 40% to 60% of the entire part production cycle. In particular, the multi-tasking machine is a complete machine for a complete machine. In the past, it required 2 to 3 machines. From the analysis of the manufacturing cost of the machine tool, it can save more than twice the cost of steel raw materials; from the equipment investment analysis of the machine tool, it can save more than twice the production area; from the production cost analysis of the machine tool, it can save manpower and power resources It can improve the processing efficiency by more than twice; from the machining precision analysis of the machine tool, the one-time loading of the workpiece can reduce the installation error and greatly improve the machining accuracy.
At the beginning, Japan's multi-tasking machine was based on a lathe, plus milling and strengthening. This is because almost all machining of the lathe is subject to secondary milling and hole machining. The development of composite machining machines was originally aimed at synthesizing these machining processes.
However, the recent multi-tasking machine tool has changed from the original turning machine to the main part of the milling machine, and the use of the machining center has increased.
Turning-based composite machining machines. This type of machine integrates milling, drilling and tapping, boring, grinding, and hobbing and gear shaping in a horizontal turning center and a vertical turning center to become a horizontal or vertical turning and turning compound. Processing machine tools. Representatives are Austrian WF, Japan's MAZAK and Germany's DMG.
Austrian WFL's M65 horizontal turning and milling machine tool has a certain representativeness. The machine adopts the traditional horizontal lathe layout, the bed adopts a high-rigid 60° inclined bed structure, and the guide rail is specially designed large-size linear guide rail with high rigidity and excellent vibration resistance. The left end of the bed is a turning spindle box with a C-axis function. The right end is the tailstock device. The upper part of the inclined bed is a car, milling and boring spindle device, which can perform linear motion and B-axis oscillating motion in the longitudinal direction (Z axis), the lateral direction (X axis), and the radial direction (Y axis). In addition, the B-axis can also be indexed in units of 2.5°, with the ability to perform roughing and milling. The lower part of the inclined bed is a central support that can be controlled in both the longitudinal and lateral directions for end face and bore machining. The workpiece cannot be supported when the tailstock is not used.
Milling-based composite machining machines. This type of machine integrates turning, drilling and tapping, boring, grinding and hobbing and gear shaping on the basis of horizontal machining centers and vertical machining centers. It is a horizontal or vertical milling compound. Processing machine tools. For example, the INé„„TEGREXe-800V/5 and e-1550V10 horizontal milling and turning machine tools of MAZAK of Japan add rotary turning function to the workbench of the five-axis horizontal machining center, which can be used for circular discs in one loading. The parts are fully processed in the process of turning, milling and the like. The INTEé„„GREXe-500HS vertical milling and turning machine has a rotary spindle with chucks at the left and right ends of the machine. The right end of the chuck can be axially extended and retracted, which can be used for top card processing of long shaft parts. At the left and right ends, the machining of the two short shaft parts, such as turning and milling, is performed simultaneously.
The amount of the adhesive will affect the bonding quality of the pipes. The less usage of adhesive will cause the adhesive incomplete and leakage. Too much will causesolvent evaporation slow and even the compression performance reduce. For PVC adhesive is PVC strong solvent, the excess adhesive flowing into pipes will cause two aspects influence: One is to cause serious corrosion, resulting the pipe rupture in the process of test the water or usage. The second is that it will form certain water resistance in the pipe.