Renewable resources are one of the most important projects in our country. Recycling resources are used to maximize resource savings, metal recycling, paper recycling, textile recycling, and so on. Recycling of various fashion clothing and protective clothing can also be of great use, and they can be recycled to produce protective gloves.

Some resource recovery points specifically recycle cotton, hemp, chemical fiber, and woolen clothes, and denim clothing is also accepted, but leather clothing is not accepted. According to the person in charge of the company, the technology for the recycling and recycling of used clothes is not new in the country. Some enterprises in Shenzhen, Zhejiang and other places already had related companies. However, in the past, only the corners of textile mills were recycled. In recent years, they have been used in universities and communities. Recycling of old clothes, production of recycled cotton and recycled pellets, after drawing and expanding cotton, becomes the raw material of textile mills. Generally, cotton and chemical fiber can be recycled twice. After the first recycling, they can be made into non-woven fabrics and labor protection gloves. The second recycling can only be used as the foundation fabric of highways and agricultural greenhouses.

Re-examining the current environment, recycling of environmental protection resources is very important. Start with yourself and start small things around....

China Labor Insurance Network

I. Product Description

TC-EM-1 is a polymeric emulsifier, which is a low molecular weight, high electropositive organic polymer. It has followed advantages:

1. Easy to use, do not need cooking. Reduce cooking equipment for solid starch and lower down technical condition fluctuation for cooking the starch.

2. Use current water to dilute and prepare, without heating.

3. Provide a strong positive charge to the system

4. High emulsion stability

 

II. Product Feature

Appearance

Red brown liquid

Solid content %

25. 50±0.5

Ionicity

Cation

PH value

3.50~4.50

Viscosity(mpa.s/25℃)

60.0

 AKD Emulsifier

III. Product Usage Safety Instruction:

TC-EM-1 may be stimulative to skin and eyes, and it is recommended to use gloves and protective glasses when use. If eye or skin comes into direct contact with this product, immediately rinse with plenty of water for at least 15 minutes. 

 

IV. Application

As a emulsifier and stabilizer of AKD,TC-EM-1 can provide a good stability of the emulsion. With the mechanical stirring, it can disperse AKD as required in the production process, which average particle diameter more than 80% can be less than 1.2 microns. It can also maintain a relative long time after the emulsification, and it has a certain electrical neutral to the slurry.

Please note, under high hardness, the hydrolysis rate of AKD emulsion will be greatly improved. So in order to reduce the rate of hydrolysis, the PH value of emulsified should be controlled between 4.5~5.0 by Citric Acid. TC-EM-1 has low PH value, which saves this part of the operation. 

For certain application, the usage of TC-EM-1 should also follow the operating instructions of our company.

 

V. Other Information

Package: 1000Kg /IBC barrel

Storage: in cool and dry place, avoid frozen and sunshine

Shelf life: 6 months.

AKD Emulsifier

AKD Emulsifier,Starch Based Emulsifier,AKD Emulsifying Agent,25% AKD Emulsifier

Shandong Tiancheng Chemical Co., Ltd. , http://www.tianchengchemical.com