1. What is a buckle?
Buckle, as its name suggests, clasps the buckled object in two items. Nashui Buckle is easy to install, easy to use, safe, secure, vibration resistant, and tightly fast enough to be repeatedly turned on and used numerous times.

3. What is the difference between the thickness and thinness of the buckles?
The difference is mainly whether the buckle force and tension force are deformed. Buckle between the normal standard 1.5 to 3.0. Less than 1.2 is non-standard and may create safety issues.
General criteria can refer to the following list:
The buckle used for the car box: the material is required to be forged at high temperature and the thickness is between 3mm and 5mm.
Vibrating equipment type buckles: Requires elastic, adjustable, thickness between 3mm-2mm.
Outdoor wet type buckle: 304 stainless steel is required to be corrosion resistant. The thickness is between 2.5-1.5.

4, how to judge the quality of the buckle in the daily life is good and bad?
1. Start with the surface treatment of the product: The product made from a good sheet has a very smooth surface and the plating is smooth. The poor products made from the plate are potholes, even if the plating is a few layers, because the plating will not fill the defects on the surface of the product. Some will also have problems with small bubbles or yellowing. These are the performance of defective products.

2. Starting from the edge and inside of the product: Good products are produced through burr processing, so that the products will not be scratched or ugly; even the best molds used for a long time will produce burrs so they need to be processed. The poor product is directly assembled without forming a surface treatment, so that a part of the cost can be saved, and it will be shaved or difficult to open when used. This is called cutting corners.

3. Starting from the material thickness of the product: People often see a good product material that is thick and long-lasting. A poor product is thin, cheap, and it will take a long time before it is broken. The same reasoning is the same with buckles. Good product materials are thick and strong. They have many uses and they have a long life. Poor product materials are weak, so they will be deformed and easily damaged. The number of uses is small and short.

4. Starting from the assembly technology of various parts of the product: the product is good or bad, the service life is long and short, and the assembly technology has a lot to do with the assembled parts. A good product is assembled and the detail of each activity is quite flexible. Rivets and springs are made according to the size standard of the product. Poor products are either too tight or too loose to be assembled, and the gap is too large to roll up and down. Rivets and springs are also non-standard, which will reduce the quality and life of the product.

5. Start with the product packaging: The real strength of the manufacturers is very important to the image of the product packaging; therefore, they are willing to pay more to package each product. On the contrary, some poor products, businesses in order to make more money, poor packaging or very thin, and even some unpackaged, chaotic and more common.
What are the main categories of buckles?

Circular loom

   We can make 2 types of Circular Loom: Small Circular Loom and Big Circular Loom.

   Small circular loom:

   Can weave hose diameter: 20mm-110mm,up to size 250mm after adding some accessories. Motor power: 5.5kw, outside size :∮1800x950mm.

   Control power: 24V DC.    CE approved.

    Big circular loom:

   Can weave hose diameter: 200mm, 250mm, 300mm, 350mm,up to size 400mm after adding some accessories. Motor power: 11kw, outside size :∮2315x1291mm.

   Control power: 24V DC.    CE approved.

Circular Loom

Circular Loom,Circuar Weaving Loom,Wear-Resiting Machine,Woven Bag Circular Loom

NANTONG SENTIAN FIRE-FIGHTING EQUIPMENT CO.,LTD. , http://www.firehosefactory.com