Model NO.: CL-C
Certification: ISO9001
Substrate: Concrete Surface
Components: Film Forming Matter
Formation Mechanism: Non Conversion Type
Solid Content: 98%
Low Temperature Flexibility: -25degree Centigrade, No Crack
Self Healing: No Water Penetration
Thermostability: 80 Degree Centigrade, No Slip,No Flow,No Drip
Anti-Water Breakthrough 0.6MPa: No
Characteristic: Creep Property, Bonding Perpormance, Self-Healing
Trademark: nuode jinlong
Transport Package: Metal Bucket
Specification: 20kg
Origin: China
HS Code: 3824999990
liquid paint for building non-solidify
rubber bitumen waterproof coating

Liquid Paint for Building Non-Solidify Rubber Bitumen Waterproof Coating
 
 
liquid paint for building non-solidify rubber bitumen waterproof coating
 

Non-cured rubberized bitumen waterproofing coating is the new waterproofing material which is newly developed by our company.This product is one-component waterproofing coating be made by some modified materials,it is composed of rubber powder,high polymer and bitumen etc.

Liquid Paint for Building Non-Solidify Rubber Bitumen Waterproof Coating

liquid paint for building non-solidify rubber bitumen waterproof coating

Non-cured rubberized bitumen waterproofing coating has the outstanding creep properties,good waterproofing performance and aging resistance.Applying of this product including plastering,spraying or slip casting etc.This coating can be used to made composite waterproofing membrane with others membrane and also using for a independent waterproofing layer.

Feature:

  • Excellent creep property
  • Good bonding performance
  • Excellent self-heating property
  • Excellent wet construction at the grassroots level
  • Excellent resistance to chemical corrosion resistance and aging resistance
  • Superior environment performance

Liquid Paint for Building Non-Solidify Rubber Bitumen Waterproof Coating

liquid paint for building non-solidify rubber bitumen waterproof coating

Use Scope:

  • Waterproofing of roofs
  • Waterproofing of balconies,terraces and verandas
  • Waterproofing of wet areas(under-tile)in bathroom,kitchens,balconies,auxiliary rooms,etc.
  • Waterproofing of green roofs,flowerbeds,planter boses
  • Waterproofing of old bitumen felts,asphalt felts,EPDM and PVC membranes and old acrylic coatings.
  • Protection of Polyurethane Foam Insulation
  • Waterproofing and protection of Concrete constructions like Bridge-decks,tunnels,stadium stands,car parks,etc.
 
Construction Points:
Liquid Paint for Building Non-Solidify Rubber Bitumen Waterproof Coating
 
liquid paint for building non-solidify rubber bitumen waterproof coating
- Clean up the grass -roots
When the surface of the grass-roots level obviously uneven is suitable to use cement mortat screeding; Through the pipline of the waterproof layer,embedded parts and equipment foundation shall be buried bedore the waterproof layer construction and installation.The gaps between the popline and structure should plugging tightly of fine stone concrete or polymer waterproof mortar. Use a broom or hair drier to clean up grass-roots mortar and construction waste. Acceptance of the basic level should smooth, solid, drainage slope comply with the design requirements, grass-roots level can be wet but can not have water on the surface.

- Detail parts additional layer construction
The place such as roof rainwater mouth, the roof tube root, the inside and exposed corner of parapet and gutter firstly blade coating 1mm non-cured rubberized asphalt waterproof coating to make strengthen.

- Coating construction
Coating can choose blade coating or spray coating construction, open extrusion pump, to squeeze non-cured rubberized asphalt waterproof coating to the grass-roots,blade coating evenly and full coating not exposed base,coating thickness according to the design requirements.

- Pave coil
Then paving the coiled material to waterproof coating surface that has completed the construction, it should laid straight,smooth,no wrinkle. Coiled material lap width is 100mm, overlapping parts adopt cold stick form, then blade coating or spray coating non-cured rubberized asphalt waterproof coating on coil lap width range, no need table dry time, can be directly construction overlapping parts of the coil, and rolling.
 
- Water-storing test
After the completion of the waterproof layer, water storage experiment was carried out in accordance with the regulation. Storage 24 hours no leakage water is qualified.
- The construction of protective layer

The quality of roof waterproof layer can be qualified acceptance, protective layer construction can be going. According to design requirements do the corresponding concrete, block material ot cement mortar layer.

Liquid Paint for Building Non-Solidify Rubber Bitumen Waterproof Coating
 
liquid paint for building non-solidify rubber bitumen waterproof coating
Packing:
Metal bucket.  20KG per bucket

Sorage:
  • Store coatings in a cool location that does not freeze. We recommend using coatings within one year.
    Always stir well before use.
  • If the water and solids have separated and do not easily combine into a creamy heavy-paint consistency, discard the coating.

Contact information:
Liquid Paint for Building Non-Solidify Rubber Bitumen Waterproof Coating

Company profile:

Nuode Jinlong offers a range of high quality waterproofing solution-based products especially foe the prefessional .Our main products including:

  • SBS/APP modified bitumen waterproofing membranes
  • Self adhesive bitumen waterproofing membranes
  • Self adhesive bitumen flashing tape
  • Self adhesive butyl waterproofing tape
  • PVC/TPO/HDPE/EVA waterproofing membranes 
  • Polymer compound waterproofing membranes
  • Liquid bitumen coating

Our company also export Dimple drainage board, Non woven polyester mat and Glassfiber mesh compound mat for bitumen membranes,Glassfiber mesh,Modified bitumen membrane production lines,etc.

Classic Swimming Pool Glass Mosaic Tiles

It`s hard to imagine a swimming pool without tile: Whether you`re going for a minimalist-meets-industrial look or an over-the-top tropical oasis, the right pool tile can take your design to the next level.

But there`s more to decorative pool tile than meets the eye. In addition to adding a splash of color or a unique, eye-catching texture to your swimming pool, tile also helps protect your pool finish -- particularly along the waterline?where stains and mineral buildup can create maintenance headaches.

Of course, when it comes to pool tile, you have lots of choices: Do you want large, ceramic tiles or a mosaic of tiny, glass tiles? Do you want modern pool tile or something more traditional? Is cost a factor? What size pool tile appeals to you the most?

In this guide, we`ll take a look at some of the main choices you`ll need to make when selecting your ideal pool tile.

About our company:

Gong Loon Industries Limited was established in 1986 . We are manufacturing the quality glass products, e.g. glass mosaic tiles and container of glass for different pattern of industries. Headquartered in Hong Kong, with factory in Jiengmen, China. Our factory plants around 36000 sq. meters and around 400 employees. In 1998, we launched the private brand: HK Pearl to entry the oversea markets, up to now, We have been shipping glass products worldwide for 20 years to over 70 countries, especially in U.S.A, Europe and Asia Pacific. As a manufacturer of glass products in the world. High quality, competitive price and after sales services are essential elements.


Swimming pool,Classic,Tiles,Mosaics

Gong Loon Jadeite Manufacture Co.,Ltd , https://www.bluebird-mosaic.com