In order to guide employers in rationally equipping and properly using labor insurance products, to protect the safety and health of workers in the production process, and to ensure safe production, the State Economic and Trade Commission organized and formulated the "Standards for the Provision of Labor Protective Equipment" in accordance with the Labor Law of the People's Republic of China. "Trial"), please implement it carefully.
"Preparation of Standards for the Provision of Labor Protective Equipment (Trial)" and Explanation of Related Issues:
I. This standard is based on the "Law of the People's Republic of China" and other relevant laws and regulations, to further strengthen the management of labor protection supplies to protect the safety and health of workers in the labor process.
Second, this standard applies to all enterprises and individual economic organizations in the People's Republic of China.
The labor insurance products provided for in this standard refer to the necessary items provided by the employer to protect the safety and health of workers during the labor process. Employers should guide and supervise the correct use of labor by workers.
Third, the state implements a safety production license system for special labor insurance products. The special labor insurance products purchased, issued and used by employers must have safety production licenses, product certifications, and safety appraisal certificates.
4. The employer shall establish and improve the management system for the procurement, acceptance, custody, distribution, use, replacement, and retirement of labor protection articles. The safety and security department shall accept and accept the purchased labor insurance products.
V. This standard is based on the “Catalogue of the Types of Work in the People's Republic of China.” 116 types of work are selected as typical types of work, and the provision of labor protection products for other types of work can be determined with reference to Appendix B, “Table of Similar Work Types”. For example, if the number of labor supplies for tanker cleaning workers is the same, the similar type of station No. 3 “Gas Station Operator” from Appendix B shall be determined with reference to the standard for the “Gas Station Operator”.
6. This standard refers to the national standard GB11651 89 "Selection rules for the use of labor protection articles." According to the labor environment and working conditions of various types of work, labor insurance articles with corresponding safety and hygienic properties shall be provided, and shall be represented by letters marked with various protective performances ( Such as cc, fg, hw, etc., see Appendix A, "Protection performance letters table"). The material, style, and color of the work clothes in the standard must meet the requirements for the safety of the work.
7. Persons who are engaged in multiple operations or working in multiple labor environments shall be provided with labor protection products in accordance with the type of work and the work environment of their major operations. If the labor insurance products provided are not applicable to other types of work or other labor environments, they should be matched with or borrowed from other labor protection products.
VIII. This standard requires dust masks for workers of some types of work. Gauze masks must not be used as dust masks.
Nine, the release of anti-virus protective gear should be based on the types of workers may be exposed to toxic, accurately select the appropriate canister (box), each time should be carefully checked before use is effective, and in accordance with national standards, regular replacement of canisters (box).
10. In this standard, gloves made of canvas, yarn, velvet, leather, rubber, plastic, latex, etc. are collectively referred to as “labor protection gloves”. The employer should prevent cutting, grinding, burning, and ironing in accordance with the workman's work. The actual needs of injuries such as freezing, electric shock, static electricity, corrosion, and water immersion are equipped with gloves of different protective properties and materials.
XI. The "hearing aid" in this standard is the collective name for earplugs, earmuffs and anti-noise helmets. Employers can equip workers with the intensity and frequency of noise in the workplace.
12. In addition to the periodic replacement of insulating gloves and insulating shoes, it is also necessary to make inspections of the insulation performance before each use and retest insulation performance every six months.
XIII. For the type of work in which the eyes may be affected by splashes of iron scraps, etc., the use of ordinary glass lenses is fragile after impact and can cause indirect injury to the wearer's eyes. He must wear anti-impact glasses.
14. Personnel involved in production management, dispatching, security, security inspections, internships, outside visitors, etc., shall be provided with appropriate labor insurance supplies according to their regular production areas.
15. When a production facility is damaged or fails, workplaces where toxic and hazardous gases may leak may, in addition to providing workers with routine labor protection supplies, place the necessary anti-virus protective gear on the spot to prepare for escape and rescue. Should be used urgently. Employers should also have special personnel and special measures to protect them in good standing condition.
16. Workplaces such as buildings, bridges, ships, and industrial installations must be equipped with safety nets in accordance with the regulations. Operators shall rationally select and wear corresponding types of safety belts according to different operating conditions.
17. Taking into account that a type of work may have different operating environments, different actual working hours and different labor intensities in different enterprises, as well as the differences in the climate, environment, and economic conditions of various provinces and cities, the labor insurance provisions stipulated in this standard for various types of work The type of equipment is the minimum equipment standard, and there is no specific stipulation for the period of use of labor insurance products. When the provincial-level safety production comprehensive management department formulates the equipment standards for the province, additional labor and safety supplies are required according to actual conditions, and the period of use is stipulated.
18. For the types of jobs not listed in this standard, the provincial comprehensive production safety management departments shall, when formulating their own standards for the provision of the province, equip their labor insurance supplies according to the actual situation.

Monocrystalline Silicon Solar Panel 6X12

Monocrystalline Silicon Solar Panel 6X12,Monocrystalline Silicon Solar Panel,Monocrystalline Solar Panel,Solar Panels For Home

ZHONGWEI CITY YINYANG NEW ENERGY , http://www.yinyangnewenergy.com