Regret 1: Did not play air conditioning holes in advance Entrance decoration Children's room decoration TV decoration socket decoration painting decoration living room background decoration living room function sofa bed cloth sofa floor tile door mat computer sofa chair function sofa bedroom bedroom TV background wall bedroom lamp bedroom lamp
Professional and top quality Power Tools essential condition
1.Power tools` motor realistic rated input power is 3 times than laser power.
1.Motor material determine the motor overload performance. It is silicon steel.Good silicon steel has high wearing coefficient and perfect radiation effect.
2.Commutator is silver alloy. Good commutator has high wearing coefficient.Because there is carbon brush contact and friction. Perfect wearing coefficient could enhance the motor using longevity.
3.Universal motor use rounded wire to contact commutator and silicon steel. There is copper and aluminum. Aluminum rounded wire is not overload and easily broken of overload loading. The copper rounded wire could bear or support big overloading.
4.Good fan could increase the radiation effect.
5.Total motor all 1.2.3.4.5 could establish a perfect long longevity motor.
6.Motor axle gear hard is about 45HRC.
7.Big gear hare is more than 48HRC or 48-52HRC.
Power Tools Angle Grinder, Cutting Off Saw, Electric Router, Impact Drill, Cordless Drill YongKang WALMA Tools CO., LTD. , http://www.walmatools.com
The regret tells: When the decoration is catching up with the winter, so did not think to want to hit the air conditioning hole, wait until the summer to air conditioning when the hole that is hit now. When the hole was drilled, the drill went up and made the wall in the bedroom a big face. It was very ugly.
Unfortunately remedy: As the use of rhinestones for air conditioning holes will stain the walls, it is advisable to consider the location of the air conditioning and the height of the suspension when decorating. If you decide to use air conditioning, it is best to beat the air conditioning holes before blowing white. it is good.
Regret 2: Unreasonable power supply location
Regrets to tell: The bedroom did not measure accurately when wiring, but roughly visually, put the location of the power socket. As a result, when the computer desk was bought and returned home, it was discovered that the position of the table leg was just blocking the position of the power outlet. There was no way to replace it with a socket, and the line went out.
Unfortunately remedy: Before arranging the position of the bedroom power outlet, the dimensions of the furniture to be placed should be provided to the electrician as accurately as possible. In addition, under the premise of not affecting the appearance, as many as possible to reserve a few outlets, sooner or later in the future to use.
Regret 3: The top light did not make a double control
Regrets about: After six months of renovation, I heard that the ceiling light can be double-controlled, with a switch beside the door and a switch beside the bed. This saves you from lying in bed and turning off the lights in the winter.
Unfortunately remedy: During the renovation process, communicate with friends and worker masters to find a fitting solution suitable for your home. If you can not do double control lights, you can install the controller on the ceiling light, turn the top light into a remote control, can also achieve dual control effect.
Regret 4: Geothermal backfill did not level the ground
The regret tells: When you decorate your bedroom, you can change your geothermal energy. You can not level the floor when you are backfilling. This causes the ground to be uneven and the height difference is large. Although there is nothing wrong with the naked eye, the quality of the ground may be too bad, which will seriously affect the paving of the floor and require that the leveling of the ground be performed again.
Unfortunately, the remedy: When the geothermal backfill is completed, the owner must be present. The worker is urged to perform ground leveling on the site. The smoother the floor is, the easier it is to lay the floor. Otherwise, leveling through equal methods of land flow afterwards is not only costly but also complicated.
Sorry place: living room
Regret 5: There is no leftover door size
The regret tells: When installing the second door of the living room into the household, only the thickness of the floor was taken into consideration, and the thickness of the floor mat was not considered. As a result, there was almost no excess after the floor was finished. Originally wanted to put a beautiful floor mat at the entrance, it now seems impossible to achieve.
Unfortunately remedy: When installing the door, be sure to fully consider the thickness of the floor, floor tiles, floor mats, etc., leaving more than in advance.
Regret 6: Wall wall is not reserved for wall outlet
Regrets tells: When the TV background wall is decorated, patronizing to see the overall effect, neglecting its practical function, results forgot to reserve the power socket of the wall-mounted TV. No way, LCD TVs can only be placed on TV cabinets, and they feel depressing. If you hang up, you have to take the open line. It's ugly.
Unfortunately remedy: If the owner uses an LCD TV at home, be sure to leave a wall outlet on the wall. If the TV cabinet is of a standard height, even if the TV is placed on a TV cabinet, the wall outlet can be blocked without affecting the appearance.
Regret 7: The background decoration painting pitch is small
The regret tells: the background decoration painting that hangs in the living room decoration first, buy the sofa afterwards. The size of the decorative painting was 0.6m×0.6m, and four pieces were hung together. The spacing of each piece was 0.4m and the total length was 3.6m. At the time of hanging, I found it very beautiful, but the 4.2m-long sofa would appear to be too small for the decorative painting. If the distance is bigger, it would be better.
Unfortunately remedy: Before hanging the background decoration painting, be sure to determine the length of the living room and the size of the sofa, after taking into account these factors, and then decide the decorative painting spacing. If you do the work again, there will be nails left on the wall.
Regret 8: Suspended ceiling keel did not consider chandeliers
Regrets about: When the ceiling of the living room did not consider too much, how did it not communicate, it was completely completed by the carpenters themselves. As a result, there was a problem with the lamp. The crystal chandelier that was bought could not be reached. The worker's master said that he did not know the crystal lamp at first, so the keel in the ceiling was very simple and could not bear the weight of the crystal chandelier.
Unfortunately remedy: If you want to install the lamp in the ceiling, you must participate in the design of the structure behind the ceiling. The woodworker cannot make his own claim. The carpenter does not know the future lighting design. If the behind the skeleton is not appropriate, the lamp will be affected in the future.