Wireless Remote Control Grow Light 200W Wireless Remote Control Grow Light 200W,Full Spectrum LED Lights For Plant,200W Tunable Grow Light,Indoor 200W Grow Light Yichang Green Eco-agriculture Co., Ltd. , https://www.plantgrowlamp.com
Length
6m, 8m, 10m, 12m,customized according to your drawing
Diameters
As your requirement
Thickness
As your requirement
Lightweight and high strength: The specific strength of FRP material is equivalent to that of high-grade alloy steel. Its density is 1.5~2.0, which is 1/4~1/5 of carbon steel, and the tensile strength is equivalent.
Corrosion resistance: FRP is a good anti-corrosion material with good resistance to atmospheric, water and general concentrations of acids, bases, salts and various oils and solvents.
Good insulation performance: FRP is a good insulating material that can be used to make insulators. Therefore, during the use of the FRP light pole, there is no electric shock and injury caused by electric leakage.
Maintenance-free: Due to its corrosion resistance, FRP poles do not require maintenance throughout the life cycle. The surface is coated with special spray materials to ensure no significant fading for 10 years.
The surface is smooth and beautiful: the surface of the FRP rod has a good affinity with the outer coating material, so the surface of the lamp post after molding is very smooth and more beautiful than ordinary steel rods.
Low installation cost: Because of its light weight, FRP poles do not require a crane for installation. They are quick and easy to install and have little impact on traffic. In the streetlight project, the labor cost accounts for about 20%~30% of the total cost. If the FRP pole is used, the cost can be effectively reduced.
Strong wind resistance: FRP material has slight elasticity. When the typhoon comes, it will produce about 10% amplitude, but this is plastic deformation. After the typhoon, it will rebound back to its original position. The principle is similar to bamboo.
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory manufacture in Hebei, welcome you come to visit.
Q: How long is your delivery time?
A: Usually 30 days after receive your payment.Â
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance.Â
  Payment>=1000USD, 30% T/T in advance ,balance before shippment.
  L/C at sight also acceptable.  Â
Company Information
Hebei Shengwei Ji Ye Frp Group Co., Ltd. was established in 1977, with a registered capital of 20 million. The company has 166 employees (8 senior engineers, 4 designers, 30 technicians), and covers an area of 200 acres. , production, sales, service as one.
The company's main products are: smc molded products, FRP pultruded profiles, cable trays, flat panels, grilles, cooling towers, trench cover, mold parts processing and production, hand lay-up products. Widely used in electric power, transportation, metallurgy, tourism, food processing, building materials and anti-corrosion engineering industries, the products sell well in the more 40 countries.
We can making professional solutions for you !
Â
Length
6m, 8m, 10m, 12m,customized according to your drawing
Diameters
As your requirement
Thickness
As your requirement
Lightweight and high strength: The specific strength of FRP material is equivalent to that of high-grade alloy steel. Its density is 1.5~2.0, which is 1/4~1/5 of carbon steel, and the tensile strength is equivalent.
Corrosion resistance: FRP is a good anti-corrosion material with good resistance to atmospheric, water and general concentrations of acids, bases, salts and various oils and solvents.
Good insulation performance: FRP is a good insulating material that can be used to make insulators. Therefore, during the use of the FRP light pole, there is no electric shock and injury caused by electric leakage.
Maintenance-free: Due to its corrosion resistance, FRP poles do not require maintenance throughout the life cycle. The surface is coated with special spray materials to ensure no significant fading for 10 years.
The surface is smooth and beautiful: the surface of the FRP rod has a good affinity with the outer coating material, so the surface of the lamp post after molding is very smooth and more beautiful than ordinary steel rods.
Low installation cost: Because of its light weight, FRP poles do not require a crane for installation. They are quick and easy to install and have little impact on traffic. In the streetlight project, the labor cost accounts for about 20%~30% of the total cost. If the FRP pole is used, the cost can be effectively reduced.
Strong wind resistance: FRP material has slight elasticity. When the typhoon comes, it will produce about 10% amplitude, but this is plastic deformation. After the typhoon, it will rebound back to its original position. The principle is similar to bamboo.
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory manufacture in Hebei, welcome you come to visit.
Q: How long is your delivery time?
A: Usually 30 days after receive your payment.Â
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance.Â
  Payment>=1000USD, 30% T/T in advance ,balance before shippment.
  L/C at sight also acceptable.  Â
Company Information
Hebei Shengwei Ji Ye Frp Group Co., Ltd. was established in 1977, with a registered capital of 20 million. The company has 166 employees (8 senior engineers, 4 designers, 30 technicians), and covers an area of 200 acres. , production, sales, service as one.
The company's main products are: smc molded products, FRP pultruded profiles, cable trays, flat panels, grilles, cooling towers, trench cover, mold parts processing and production, hand lay-up products. Widely used in electric power, transportation, metallurgy, tourism, food processing, building materials and anti-corrosion engineering industries, the products sell well in the more 40 countries.
We can making professional solutions for you !
Â
Model NO.: SWJY-Lp1
Roll Weight: 28 - 55kgs
Bond Type: Powder or Emulsion
Density: 80G/M2-900G/M2.
Softness: Smooth
Roll Width: 200 - 2600mm
Material: Fiberglass
Brand: Swjy
Trademark: SWJY
Transport Package: as Your Need
Specification: accroding to customer′s need
Origin: Hebei
HS Code: 3926909090
Model NO.: SWJY-Lp1
Roll Weight: 28 - 55kgs
Bond Type: Powder or Emulsion
Density: 80G/M2-900G/M2.
Softness: Smooth
Roll Width: 200 - 2600mm
Material: Fiberglass
Brand: Swjy
Trademark: SWJY
Transport Package: as Your Need
Specification: accroding to customer′s need
Origin: Hebei
HS Code: 3926909090