Galvanized Wire
Assortment of Galvanized Iron Wire: Electro galvanized iron wire and hot dipped galvanized iron wire.
Electric galvanized wire BWG:8#-36#(3.8mm-0.15mm)
Zinc coated weight:4-35g/m2
Hot-dipped galvanized wire BWG:8#-38#(3.8mm-0.19mm)
Zinc coated weight:30-380g/m2
Electro Galvanized Wire,Hot Dipped Galvanized Wire,Galvanized Binding Wire,Gi Wire,Galvanized Tie Wire Anping Sanxing Wire Mesh Factory , https://www.anpingsanxingwiremesh.com
2CY gear pump mainly gear, shaft, pump, pump cover, bearing sleeve, shaft seal and other components. Nitriding gear has a higher hardness and wear resistance. Install with shaft in replaceable sleeve. The lubrication of all parts in the pump is automatically achieved by the use of conveying medium while the pump is in operation. Pump bearing within the four floating installed in the pump, with the work of pressure automatically adjust the size of the gap between the end, so the pump pressure stability, the output flow pulsation, the high efficiency of the solution. From the spindle extension to the pump to see, clockwise rotation. 2CY gear pump for conveying solid particles and fibers, non-corrosive, the temperature is not higher than 80 ℃, the viscosity of 5 × 10-6 ~ 1.5 × 10-3m2 / s (5-1500cSt) of lubricating oil or similar nature Other fluids for lubricating oil and for hydraulic turning systems. Application range In the oil transmission system can be used as transmission, booster pump; in the fuel system can be used as delivery, pressurization, jet fuel pump; in the hydraulic drive system can be used as a hydraulic pump to provide hydraulic power; Industrial areas, can be used for lubricating oil pump; 2CY gear pump from the left and right pump cover, the main, sleeve, pump body, driven gear shaft, oil seal and other components. When the gear is rotated, the volume of the oil inlet chamber changes from small to large as the meshing teeth continue to disengage. The formation of a vacuum, the liquid inhalation, a tooth valley to the oil chamber, and the oil chamber volume, due to the meshing teeth continue to mesh and become smaller, the oil is compressed and discharged, so as to achieve the purpose of conveying oil. 2CY gear pump is mainly used in a variety of machinery and equipment in the lubrication system for conveying lubricants for conveying viscosity below 10 ° E, the temperature below 200 ℃ lubricated fuel. The overall stainless steel gear pump can deliver non-lubricated oils, beverages, low-corrosive liquids.