The floor waxing conservation tips introduced by Xiao Bian today are only applicable to families with time and small floor area. If it is a large area of ​​the floor need to be waxed, it is recommended that you ask a professional cleaning company to do, because they have a professional waxing and polishing machine, the construction is faster and the price is not expensive.

1, waxing environment preparation

The best choice for floor waxing is when the weather is better, such as this cool autumn day. To avoid construction when the humidity is high on rainy days and when the temperature is low, excessively high humidity tends to cause white turbidity, and when the temperature is lower than 5 degrees Celsius, floor waxes tend to harden, which is not conducive to construction.

2, construction tools and floor wax preparation

Large area waxing often use waxing machine, small area is the use of dust or soft cloth. Now many people also have smaller, lighter weight waxers that can be easily used when waxing. If you do not have a waxing machine, you can use a simple tool such as dust and soft cloth. Do not look at the tool is simple, but the waxing effect is not necessarily poor, but may be more detailed. In addition, the corresponding floor wax must be prepared.

3, clean the ground

Before you start waxing, you need to arrange the furniture that needs to be waxed and determine the waxing area. At the same time, the floor area should be cleaned to ensure that there is no dust or other dirt before waxing to prevent waxing. Cleaning generally uses a wrung mop or a soft cloth to wipe the floor. After cleaning, it is necessary to wait until the water on the floor is completely dry before waxing.

4, waxing

Shake the container with the floor wax and stir it evenly. Use a clean rag or sponge to fully dip the floor wax so that it does not drip. Shake and mix evenly the floor wax. You can perform partial trials in unobtrusive places and confirm that there is no abnormality before waxing. Then use a clean rag or special waxing dust to fully dip the wood floor wax and carefully apply it in the direction of the wood grain of the wooden floor. The speed should not be too fast. Do not apply paint or uneven thickness and keep it thin and even.

5, polishing

It is generally used twice, after the first pass, and then again. Each time the wax is applied, it must wait for a layer of wax to dry before it can be applied with a layer of wax. After completely drying, polish the surface with a fine sandpaper or a soft cloth.

The role of floor waxing

Clear stubborn stains on the floor, by waxing the material itself and the air to reduce the damage caused by oxidation or exposure to harmful substances in the air, to extend the life of the material and the purpose of the United States to clean. What is more important is that the mirrored surface it forms is particularly durable and can prevent detergent, scratches, scratches, heel friction, etc., while the polished wax surface is harder and more durable.

The above is related to the introduction of floor waxing. If you want to know more related information, please pay more attention to this site and provide you with more complete, more detailed and updated information information.

Floor Cleaning Waxing Floor Waxing Dark Floor Effect Floor Maintenance Floor Polishing Waxing

Eye Nut

Eye Nut,Anchor Eye Nuts,T76 Anchor Eye Nuts,Ring Eye Nut

J.B Machinery (Ningbo) Co., Ltd. , https://www.jbdrill.com