Properly reduce the concentration of the drug The efficacy of most pesticides will increase with the increase of temperature, so the dosage of the liquid should be reduced when using the drug in high temperature season. Especially the hormonal drugs should pay special attention to the drug. happened. Therefore, it is necessary to adjust the concentration of the agent according to the change in temperature. Pay attention to spray quality Spray method. Generally, the mass of the spray is uniformly distributed and the coverage is high. It is preferable to not drip on the surface of the wetted plant, so that the sprayer used is required to have a good atomization effect and reduce the waste of the liquid. At the same time, it is necessary to pay attention to the comprehensive spraying, especially some pests like to lay eggs on the back of the leaves, especially when spraying the medicine. Reasonable spraying to prevent poisoning Dispensing and applying drugs should prevent pesticides from corroding the skin. When using volatile pesticides, be sure to use masks. At the same time, it is forbidden to spray pesticides at high temperature during noon in summer. Spraying in summer should be done before 9:00 am or after 4 pm to avoid phytotoxicity. It is important to remember that the continuous application time should not be too long. More pesticide knowledge , please pay attention to China Pesticide Network DIN11850 Stainless Steel Sanitary Pipes is the main tubing line for a piping system. Generally, DIN11850 Stainless Steel Sanitary Pipes are made in stainless steel 304 and 316L, but we provide other grade too such as hastelloy C22, 316Ti, Titanium and nickel alloy etc. Kaysen offer both Sanitary Seamless Tubes and Sanitary Welded Tubes to ASTM A270, ASTM A249, A269, ASTM A554, DIN11850, and size is up to 12″. Inner and outer surface is polished to meet the high purity requirement of hygienic industries. Kaysen is ability to supplying qualified DIN11850 Stainless Steel Sanitary Pipes comply to your your condition and FDA,GMP requirement. DIN11850 Stainless Steel Pipes,DIN Sanitary Tubes,1.4306 Hygienic Pipes Kaysen Steel Industry Co., Ltd. , https://www.chinasanitaryvalve.com
DIN11850 Stainless Steel Sanitary Pipes - Polished Stainless Steel Tube – Stainless Steel Hygienic Tubes
Material: SS304, SS316L, EN 1.4301, EN 1.4404, etc
OD diameter: 1/2" - 12"
Thickness: 0.5mm - 6mm
Standard: ASTM, JIS, DIN, JIS, SUS, GB
Length: 6m or customer made
Tolerance: OD. ±0.2mm; Thickness: ±0.02mm; Length: ±0.5mm
Surface Treatment: Matt Finish or Mirror Finish (320# 400# 600#) etc
Application: Boiler, heat exchanger, construction, hygienic, pharmacy, power, petrochemical
Strength:
Heat Treatment of solution annealing for the sanitary tubings and fittings are available
High precision on dimension and wall thickness
Both seamless and welded sanitary tubings are available
Length is up to 12 meters.
Min. order quantity of sanitary tubings is from 300Kgs.
Offer industrial pipe and tubes according to order.
PMI test to verify material grade.
Visual and surface 100% examination before shipment.
End protected for shipment.