Manganese Copper Alloy Wire 6j8/Manganin Wire

Description
Manganin is a trade marked name for an alloy of typically 86% copper,12% manganese,and 2% nickel.
Manganin foil andwire is used in the manufacture of resistors,particularly ammeter shunts,because of its virtually zero temperature coefficients of resistance value and long term stability. Several Manganin resistors served as the legal standard for the ohm in the United States from 1901 to 1990.Manganin wire is also used as an electrical conductor in cryogenic systems,minimizing heat transfer between points which need electrical connections.
Manganin is also used in gauges for studies of high-pressure shock waves (such as those generated from the detonation of explosives) because it has low strain sensitivity but high hydrostatic pressure sensitivity.
 
Chemical Content(%)      

 
2. Specification
   Wire: Diameter: 0.04mm-8.0mm
3. Packing detail
   1). Coil (plastic spool) + compressed ply-wooden case + pallet 
   2). Coil (plastic spool) + carton + pallet   
4. Products and services
   1). Pass: ISO9001 certification, and SO14001cetification;
   2). Fine after-sale services;
   3). Small order accepted;
   4). Fast delivery;
The copper-based low resistance heating alloy is widely used in low-voltage circuit breaker, thermal overload relay, and other low-voltage electrical product. It is one of the key materials of the low-voltage electrical products. The materials produced by our company have the characteristics of good resistance consistency and superior stability. We can supply all kinds of round wire, flat and sheet materials.

Copper nickel alloy series:Constantan CuNi40 (6J40), CuNi1, CuNi2, CuNi6, CuNi8, CuNi10, CuNi14, CuNi19, CuNi23,CuNi30, CuNi34, CuNi44.

Size dimension range:
Wire: 0.1-10mm
Ribbons: 0.05*0.2-2.0*6.0mm 
Strip: 0.05*5.0-5.0*250mm 

Main grades and properties 

Description
Manganin is a trade marked name for an alloy of typically 86% copper,12% manganese,and 2% nickel.
Manganin foil andwire is used in the manufacture of resistors,particularly ammeter shunts,because of its virtually zero temperature coefficients of resistance value and long term stability. Several Manganin resistors served as the legal standard for the ohm in the United States from 1901 to 1990.Manganin wire is also used as an electrical conductor in cryogenic systems,minimizing heat transfer between points which need electrical connections.
Manganin is also used in gauges for studies of high-pressure shock waves (such as those generated from the detonation of explosives) because it has low strain sensitivity but high hydrostatic pressure sensitivity.
 
Chemical Content(%)      

 
2. Specification
   Wire: Diameter: 0.04mm-8.0mm
3. Packing detail
   1). Coil (plastic spool) + compressed ply-wooden case + pallet 
   2). Coil (plastic spool) + carton + pallet   
4. Products and services
   1). Pass: ISO9001 certification, and SO14001cetification;
   2). Fine after-sale services;
   3). Small order accepted;
   4). Fast delivery;
The copper-based low resistance heating alloy is widely used in low-voltage circuit breaker, thermal overload relay, and other low-voltage electrical product. It is one of the key materials of the low-voltage electrical products. The materials produced by our company have the characteristics of good resistance consistency and superior stability. We can supply all kinds of round wire, flat and sheet materials.

Copper nickel alloy series:Constantan CuNi40 (6J40), CuNi1, CuNi2, CuNi6, CuNi8, CuNi10, CuNi14, CuNi19, CuNi23,CuNi30, CuNi34, CuNi44.

Size dimension range:
Wire: 0.1-10mm
Ribbons: 0.05*0.2-2.0*6.0mm 
Strip: 0.05*5.0-5.0*250mm 

Main grades and properties