lifting
ring
Our lifting ring is German standard,
forging process, have high quality for our customer. we have DIN 580 lifting eye, DIN 582 lifting
eye ,JIS1169 Eye nut and special type. The most common surface
treatments are Cr+6 free zinc, zinc nickel alloy, electroless nickel plating or
customer specified types, theses plating can stand salt spray anti rust
testing.
Lifting Eye Bolts,Lifting Eye Nut,Din 580 Lifting Eye,Din 582 Lifting Eye Qingdao Xiangchengde machine , http://www.xiangchengda.com
1. 24 years on glass manufacturing and exporting.
2. Delivery within 15 days.
3. Safety wood or plywood packing worthy for ocean and land transportation.
4. Full transport insurance.
5. Sell to 126 countries on 6 continents.
6. One-stop glass solution in RIDER GLASS.
Thickness
3mm, 4mm, 5mm, 6mm, 8mm etc.
Size
3300*1900/2134/2250/2440mm, 3660*1900/2134/2250/2440mm etc.
Glass Description
A) It is one of coated glass that has higher reflection to the sunlight, wavelength from 2.5um to 25um and is also called Low-E coated glass. And it is divided into two series of colorless transparence and colored Low-E coated glass. Used in middle and high latitudes, colorless transparence glass' transmittance is higher than 70%. It can stop heat energy indoor from scattering to raise temperature indoors. Used in low latitudes, colored glass also called Sun-E glass, can sunshade to a certain degree at the time of preventing energy from out.
B) "Low-E Glass" refers to a series of high-performance, low-emissivity products manufactured by Rider Glass introducing stare-of-the-art vacuum sputtering coating equipment.
C) The vacuum sputtering process coats glass surfaces with several layers of different materials. Among these, a silver layers effectively reflects infrared rays while maintaining excellent thermal performance. Beneath the silver layer is an anti-reflective tin oxide (Sio2) base layer that increases the transparency of the glass. Above the silver layer is an isolating nickel-chromium (NiCr) alloy coating. The main function of the top anti-reflective tin oxide (Sno2) layer is to protect the other coating layers. This product offers the high transparency, low reflectivity, and good thermal insulating and energy-saving properties required of modern architectural glass and green building design.
D) It has good spectrum selectivity, could take over the near infrared ray and visible light from sun, could block off quite a few infrared ray going indoors. It not only keeps the light brightness indoors, and also decreases the heat load indoors. It has the advantages of saving energy, environment protection, comfortable living and blocking the UV radiation etc.
Benefits
A) Approaches the natural color glass
B) Highly transparent to visible light (wavelength 380nm-780nm); Will not produce significant glare problems caused by high reflectance of visible light
C) Allows most sunlight in the visible range to center without altering its natural color provides excellent natural illumination and saves energy by reducing the need for artificial lighting.
D) Reflectively high reflectance of infrared radiation (wavelength780nm-3000nm). In particular, reflects nearly all long-wave infrared (wavelength greater than 3000nm). Blocks the entrance of large amounts of heart, and leaves interior comfortably cool in summer and warm in winter.
Rider's Advantage
A) We manufacture a wide range of glass to meet your different demands: Silver Mirror, Aluminium Mirror, Cooper and Lead Free Mirror, Antique Mirror, Anti Reflective Glass, Auto Glass, Insulating Glass Unit, Sheet Glass, Glass Block, Art Glass, Glass Accessories etc.
B) 24 years manufacturing experience.
C) Rider Glass is your best choice of one-stop glass procurement.
D) Professional Glass Supplier.Glass Manufacturer.Glass Exporter.Glass Factory.Glass Enterprise.Glass Company.
Â
    TERMS
Â
CONDITIONS
Â
MOQ
1 FCL
Payment Terms
30% T/T in advance, and balance before shipment.
Packing
Wooden crates worthy for ocean and land carriage.
FAQ
Q:How to get a quotation?
A: we need to get specific details, such as size, color, thickness, quantity, etc.
Q: Can you do the production as customized?
A: Yes, we have a professional technique team, we could produce the glass depends on your requirements.
Q. What the your glass package ? Are they safe ?
A: Wooden Crates Worthy for Ocean and Land Carriage .The crates will be very strong and every loading worker has 24 years packed, loading and fixation crates with container experience. And we send the loading pictures for you after we loading .
Q. What is your payment term ?
A: Our payment term is T/T 30% in advance ,70% after get the copy of B/L .If your glass quantity is less, we want to TT 100% . You can payment By T/T, L/C at sight.
Q. Can you supply a free samples ?
A: yes, if you want us to provide big size sample according to your requirements, you should pay the cost of production.
Â
 
Â
3-8mm K-Lite Laminated GlassÂ
1. 24 years on glass manufacturing and exporting.
2. Delivery within 15 days.
3. Safety wood or plywood packing worthy for ocean and land transportation.
4. Full transport insurance.
5. Sell to 126 countries on 6 continents.
6. One-stop glass solution in RIDER GLASS.
Thickness
3mm, 4mm, 5mm, 6mm, 8mm etc.
Size
3300*1900/2134/2250/2440mm, 3660*1900/2134/2250/2440mm etc.
Glass Description
A) It is one of coated glass that has higher reflection to the sunlight, wavelength from 2.5um to 25um and is also called Low-E coated glass. And it is divided into two series of colorless transparence and colored Low-E coated glass. Used in middle and high latitudes, colorless transparence glass' transmittance is higher than 70%. It can stop heat energy indoor from scattering to raise temperature indoors. Used in low latitudes, colored glass also called Sun-E glass, can sunshade to a certain degree at the time of preventing energy from out.
B) "Low-E Glass" refers to a series of high-performance, low-emissivity products manufactured by Rider Glass introducing stare-of-the-art vacuum sputtering coating equipment.
C) The vacuum sputtering process coats glass surfaces with several layers of different materials. Among these, a silver layers effectively reflects infrared rays while maintaining excellent thermal performance. Beneath the silver layer is an anti-reflective tin oxide (Sio2) base layer that increases the transparency of the glass. Above the silver layer is an isolating nickel-chromium (NiCr) alloy coating. The main function of the top anti-reflective tin oxide (Sno2) layer is to protect the other coating layers. This product offers the high transparency, low reflectivity, and good thermal insulating and energy-saving properties required of modern architectural glass and green building design.
D) It has good spectrum selectivity, could take over the near infrared ray and visible light from sun, could block off quite a few infrared ray going indoors. It not only keeps the light brightness indoors, and also decreases the heat load indoors. It has the advantages of saving energy, environment protection, comfortable living and blocking the UV radiation etc.
Benefits
A) Approaches the natural color glass
B) Highly transparent to visible light (wavelength 380nm-780nm); Will not produce significant glare problems caused by high reflectance of visible light
C) Allows most sunlight in the visible range to center without altering its natural color provides excellent natural illumination and saves energy by reducing the need for artificial lighting.
D) Reflectively high reflectance of infrared radiation (wavelength780nm-3000nm). In particular, reflects nearly all long-wave infrared (wavelength greater than 3000nm). Blocks the entrance of large amounts of heart, and leaves interior comfortably cool in summer and warm in winter.
Rider's Advantage
A) We manufacture a wide range of glass to meet your different demands: Silver Mirror, Aluminium Mirror, Cooper and Lead Free Mirror, Antique Mirror, Anti Reflective Glass, Auto Glass, Insulating Glass Unit, Sheet Glass, Glass Block, Art Glass, Glass Accessories etc.
B) 24 years manufacturing experience.
C) Rider Glass is your best choice of one-stop glass procurement.
D) Professional Glass Supplier.Glass Manufacturer.Glass Exporter.Glass Factory.Glass Enterprise.Glass Company.
Â
    TERMS
Â
CONDITIONS
Â
MOQ
1 FCL
Payment Terms
30% T/T in advance, and balance before shipment.
Packing
Wooden crates worthy for ocean and land carriage.
FAQ
Q:How to get a quotation?
A: we need to get specific details, such as size, color, thickness, quantity, etc.
Q: Can you do the production as customized?
A: Yes, we have a professional technique team, we could produce the glass depends on your requirements.
Q. What the your glass package ? Are they safe ?
A: Wooden Crates Worthy for Ocean and Land Carriage .The crates will be very strong and every loading worker has 24 years packed, loading and fixation crates with container experience. And we send the loading pictures for you after we loading .
Q. What is your payment term ?
A: Our payment term is T/T 30% in advance ,70% after get the copy of B/L .If your glass quantity is less, we want to TT 100% . You can payment By T/T, L/C at sight.
Q. Can you supply a free samples ?
A: yes, if you want us to provide big size sample according to your requirements, you should pay the cost of production.
Â
Â
Â
Model NO.: 3mm, 4mm, 5mm, 5.5mm, 6mm, 8mm etc.
Type: Low-E Glass
Technique: Coated Glass
Trademark: Rider Glass
Transport Package: Safety Wood or Plywood Crates Packing.
Specification: AS/NZS2208: 1996, CE, SGS
Origin: China
Model NO.: 3mm, 4mm, 5mm, 5.5mm, 6mm, 8mm etc.
Type: Low-E Glass
Technique: Coated Glass
Trademark: Rider Glass
Transport Package: Safety Wood or Plywood Crates Packing.
Specification: AS/NZS2208: 1996, CE, SGS
Origin: China
3-8mm K-Lite Laminated GlassÂ
Thanks for your time. Any enquiry,please feel free to contact us.
Thanks for your time. Any enquiry,please feel free to contact us.